User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
96
14.12 Phone settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
SIP signaling. You can specify up to 10 multicast listening addresses.
Table 28 - Multicast parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the
highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence
over all incoming paging calls.
Name
Listened multicast server name
Host: port
Listened multicast server’s multicast IP address
and port.
14.13 Phone settings >> Action
Action URL
Note! Action urls are used for IPPBX systems to submit phone events. Please refer
to Fanvil Action URL for details.
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3641fe81a5.pdf
14.14 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 29 - Time&Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol
Primary Time Server
Set primary time server address