User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
105
Picture 137 - Web Filter settings
Picture 138 - Web Filter Table
Adding and removing IP segments are accessible. Configure the starting IP address
within the start IP, end the IP address within the end IP, and click [Add] to submit to take
effect. A large network segment can be set, or it can be divided into several network
segments to add. If the user wants to delete, select the initial IP of the network segment
to be deleted from the drop-down menu, and then click [Delete] to take effect.
Enable web page filtering: configure enable/disable web page access filtering; Click the
"apply" button to take effect.
Note: if the device you are accessing is in the same network segment as the phone,
please do not configure the filter segment of the web page to be outside your own
network segment, otherwise you will not be able to log in the web page.
14.29 Security >> Trust Certificates
Set whether to open license certificate and general name validation, select certificate
module.