User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
23
Picture 8 - WEB phone status
9.5 Web Management
Phone can be configured and managed on the web page of the phone. The user needs to enter the
IP address of the phone in the browser and open the web page of the phone firstly. The user can
check the IP address of the phone by pressing [Menu] >> [Status].
Picture 9 - Landing page
Users must correctly enter the user name and password to log in to the web page. The default user
name and password are "admin". For the specific details of the operation page, please refer to page
11 Web configuration.
9.6 Network Configurations
The device relies on IP network connection to provide service. Unlike traditional phone system
based on a circuit switched wire technology, IP devices are connected to each other over the
network and exchange data in packet basis based on the devices’ IP address.
To enable this phone, you must first correctly configure the network configuration. To configure the
network, users need to find the phone function menu button [Menu] >> [Advanced Settings] >>
[Network] >> [Network].
The default password for advanced Settings is "123".
NOTICE! If user saw a ‘WAN Disconnected’ icon flashing in the middle of screen, it