User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
68
Picture 26 - Mute the call
Cancel mute: press cancel mute on the phone again. The mute icon is no longer
displayed in the call screen. The red light is off by mute button.
10.8.2 Ringing Mute
Mute: press the mute button when the phone is in standby mode:
The top right corner of the phone shows the bell mute icon ,Mute button red light
is always on, when there is an incoming call, the phone will display the incoming call
interface but will not ring.
Picture 27 - Ringing mute
Cancel ring tone mute: On the standby or incoming call screen, press the mute
button again or volume up cancel ring tone mute,no longer shows mute icon in
upper right corner after cancel .The phone mute icon is off
10.9 Call Hold/Resume
The user can press the [Hold] button to maintain the current call, and this button will
become the [ Resume ] button, and the user can press the "resume" button to restore
the call.