User's Manual
Table Of Contents
- Directory
- 1Picture
- 2Table
- 3CE Declaration of Conformity
- 4FCC Statement
- 5Safety Instruction
- 6Overview
- 7Desktop Installation
- 8Appendix Table
- 9Introduction to the User
- 10Basic Function
- 11Advance Function
- 12Phone Settings
- 13Web Configurations
- 14Network >> Basic
- 14.1Network >> Service Port
- 14.2Network >> VPN
- 14.3Network >> Advanced
- 14.4Line >> SIP
- 14.5Line >> SIP Hotspot
- 14.6Line >> Dial Plan
- 14.7Line >> Action Plan
- 14.8Line >> Basic Settings
- 14.9Line >> RTCP-XR
- 14.10Phone settings >> Features
- 14.11Phone settings >> Media Settings
- 14.12Phone settings >> MCAST
- 14.13Phone settings >> Action
- 14.14Phone settings >> Time/Date
- 14.15Phone settings >> Tone
- 14.16Phone settings >> Advanced
- 14.17Phonebook >> Contact
- 14.18Phonebook >> Cloud phonebook
- 14.19Phonebook >> Call List
- 14.20Phonebook >> Web Dial
- 14.21Phonebook >> Advanced
- 14.22Call Log
- 14.23Function Key >> Function Key
- 14.24Function Key >> Side Key
- 14.25Function Key >> Softkey
- 14.26Function Key >> Advanced
- 14.27Application >> Manage Recording
- 14.28Security >> Web Filter
- 14.29Security >> Trust Certificates
- 14.30Security >> Device Certificates
- 14.31Security >> Firewall
- 14.32Device Log >> Device Log
- 15Trouble Shooting
67
Phone end: When the phone is in the default standby state, press the [Menu] >>
[Basic] >> [Time & Date] , use the up/down navigation button to edit parameters,
press the [OK] to save after completion, as shown in the figure:
Picture 86 - Set time & date on phone
Web end: Log in to the phone webpage and enter [Phone Settings] >>
[Time/Date] , as shown in the figure:
Picture 87 - Set time & date on webpage
Table 17 - Time Settings Parameters
Parameters
Description
Mode
Auto/Manual
Auto: Enable network time synchronization via SNTP protocol,
default enabled.
Manual: User can modify data manually.