User's Manual

69
12.1.3.1 Brightness and backlight
 Set the brightness level in use from 1 to 16, [<] or [>] switch brightness level.
 Set the brightness level in the energy-saving mode from 0 to 16, [<] or [>] switch the
brightness level.
 Set the backlight time to 30 seconds by default. You can turn it off or select 15
seconds /30 seconds /45 seconds /60 seconds /90 seconds /120 seconds.
 The screen saver can be turned on or off by default.
 Web interface: enter [Phone Settings] >> [Advanced], edit screen parameters, and
click submit to save.
Picture 89 - Page screen Settings
12.1.3.2 Screen Saver
 Press [Screen Settings] to find the [Screen protection] button, press [left] / [right]
button to open/close the screen protection, set the timeout time, the default is 15S,
after completion, press [OK] button to save.
 After saving, return to standby mode and enter the screen saver after 15s, as
follows:
Picture 90 - Phone screen saver