User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
RTP Port Quantity Number of calls.
12.2 Network >> Advanced
Advanced network Settings are typically configured by the IT administrator to improve
the quality of the phone service. For configuration, query the 10.7 advanced
Settings.
12.3 Line >> SIP
Configure the Line service configuration on this page.
Table 21 - Line configuration on the web page
Parameters Description
Register Settings
Line Status
Display the current line status at page loading.
To get the up to date line status, user has to
refresh the page manually.
Activate Whether the service of the line is activated
Username Enter the username of the service account.
Authentication User Enter the authentication user
of the service
account
Display Name
Enter the display name to be sent in a call
request.
Authentication Password Enter the authentication password of the service
account
Realm Enter the SIP domain if requested by the service
provider
Server Name Input server name.
SIP Server 1
Server Address Enter the IP or FQDN address of the SIP server
Server Port Enter the SIP server port, default is 5060
Transport Protocol Set up the SIP transport line using TCP or UDP
or TLS.
Registration Expiration Set SIP expiration date.
SIP Server 2
Server Address Enter the IP or FQDN address of the SIP server
118