User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
status of a group. Multiple BLF lists are
supported.
Response Single Codec
If setting enabled, the device will use single
codec in response to an incoming call request
BLF Server The registered server will
receive the
subscription
package from ordinary application
of BLF phone.
Please enter the BLF server, if the sever does
not support subscription package, the registered
server and subscription server will be separated.
Keep Alive Type Set the line to use dummy UDP or SIP OPTION
packet to keep NAT pinhole opened
Keep Alive Interval Set the keep alive packet transmitting interval
Keep Authentication
Keep the authentication parameters from
previous authentication
Blocking Anonymous Call
Reject any incoming call without presenting
caller ID
User Agent Set the user agent
, the default is Model with
Software Version.
Specific Server Type
Set the line to collaborate with specific server
type
SIP Version Set the SIP version
Anonymous Call Standard Set the standard to be used for anonymous
Local Port Set the local port
Ring Type Set the ring tone type for the line
Enable user=phone Sets user=phone in SIP messages.
Use Tel Call Set use tel call
Auto TCP Using
TCP protocol to guarantee usability of
transport for SIP messages above 1500 bytes
Enable Rport Set the line to add rport in SIP headers
Enable PRACK Set the line to support PRACK SIP message
DNS Mode Select DNS mode, A, SRV, NAPTR
Enable Long Contact
Allow more parameters in contact field per RFC
3840
Enable Strict Proxy
Enables the use of strict routing. When the
phone receives packets from the server，it will
use the source IP address, not the address in
via field.
122