User's Manual

Display Report Options on web
Whether to display the VQ report data for the last call
through the web page.
12.9 Phone settings >> Features
Configuration phone features.
Table 27 - General function Settings
Parameters Description
Basic Settings
Enable Call Waiting Enable this setting to allow user to take second
i
ncoming call during an established call. Default
enabled.
Enable Call Transfer Enable Call Transfer.
Semi-Attended Transfer Enable Semi-Attended Transfer by selecting it
Enable 3-Way Conference Enable 3-way conference by selecting it
Enable Auto Onhook
The phone will hang up and return to the idle
automatically at hands-free mode
Auto Onhook Time Specify Auto Onhook time, the phone will hang
up and return to the idle automatically after Auto
Hand down time at hands-free mode, and play
dial tone Auto Onhook time at handset mode
Ring for Headset
Enable Ring for Handset by selecting it, the
phone plays ring tone from handset.
Auto Headset Enable this feature,
headset plugged in the
phone, user press ‘answer’
key or line key to
answer a call with the headset automatically.
Enable Silent Mode When enabled, the phone is muted, there is no
ringing when calls, you can use the volume keys
and mute key to unmute.
Disable Mute for Ring When it is enabled, you can’t mute the phone
Enable Default Line If enabled, user
can assign default SIP line for
dialing out rather than SIP1.
Enable Auto Switch Line Enable phone to select an available SIP line as
default automatically
Default Ext Line Select the default line to use for outgoing calls
129