User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
without opening audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist
on the phone, and if disabled, up to 2
simultaneous calls can exist on the phone.
Line Display Format
Custom line format：SIPn/SIPn：xxx/xxx@SIPn
Contact As White List Type NONE/BOTH/DND White List/FWD White List
Block XML When Call Disable XML push on call.
SIP notify
When enabled, the phone displays the
information when it receives the relevant notify
content.
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is
held
Enable Call Waiting Tone When turned on, a tone plays when call waiting
Play Dialing DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits at dialing, default
enabled.
Play Talking DTMF Tone
Play DTMF tone on the device when user
pressed a phone digits during taking, default
enabled.
DND Settings
DND Option Select to take effect on the line or on the phone
or close.
Enable DND Timer Enable DND Timer, If enabled
, the DND is
automatically turned on from the start time to the
off time.
DND Start Time Set DND Start Time
DND End Time Set DND End Time
Intercom Settings
Enable Intercom When intercom is enabled, the device will accept
the incoming call re
quest with a SIP header of
Alert-Info instruction to automatically answer the
call after specific delay.
Enable Intercom Mute Enable mute mode during the intercom call
Enable Intercom Tone
If the incoming call is intercom call, the phone
plays the intercom tone
Enable Intercom Barge Enable Intercom Barge by selecting it, the phone
auto answers
the intercom call during a call. If
131