User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
the current call is intercom
call, the phone will
reject the second intercom call
Response Code Settings
DND Response Code Set the SIP response
code on call rejection on
DND
Busy Response Code Set the SIP response code on line busy
Reject Response Code Set the SIP response code on call rejection
Password Dial Settings
Enable Password Dial Enable Password Dial by selecting it
, When
number entered is
beginning with the password
prefix, the following N numbers
after the
password prefix will be hidden as *, N stands for
the
value which you enter in the Password
Length field. For example: you set the password
prefix is 3, enter the Password Length is 2, then
you enter the number 34567, it will display 3**67
on the phone.
Encryption Number Length Configure the Encryption Number length
Password Dial Prefix
Configure
the prefix of the password call
number
Power LED
Common
Standby
power lamp state, off when off, open is
always bright red. Off by default.
SMS/MWI
The status of power lamp when there is unread
short message/voice message, including
off/on/slow flash/quick flash, default slow flash.
Missed
The state of the power lamp
when there is a
missed call, including off/on/slow flash/quick
flash, the default slow flash.
Talk/Dial
In the talk/dial state, the power lamp state, off is
off, on is always red bright, the default is off.
Ringing
Power lamp status when there is an incoming
call, including off/on/slow flash/quick flash,
default flash.
Mute
Power lamp status in mute mode, including
off/on/slow flash/quick flash, off by default.
Hold/Held
The power lamp state, including off/on/slow
flash/quick flash, is turned off by def
ault when
132