User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
left/retained.
Notification Popups
Display Missed Call Popup
No incoming call popup prompt after opening, no
popup prompt when closing, open by default.
Display MWI Popup
Voice message popup prompt is not answered
after opening, and it is opened by default if there
is no popup prompt when closing.
Display Device Connect Popup
There is a popup prompt when the WIFI adapter
is connected. There is no popup prompt when
the WIFI adapter is closed. It is on by default.
Display SMS Popup
There is
popup prompt for unread messages
after opening, and there is no popup prompt
when closing. It is opened by default.
Display Other Popup
When the handle is not hung back after opening,
registration fails, IP acquisition fails, Tr069
connection fails and ot
her abnormalities, there
will be popup prompt when it is opened;
otherwise, there will be no prompt when it is
closed, and it will be opened by default.
12.10 Phone settings >> Media Settings
Change voice Settings.
Table 28 - Voice settings
Parameter Description
Codecs Settings Select enable or disable voice encoding:
G.711A/U,G.722,G.729,
G.726-16,G726-24,G726-32,G.726-40,
ILBC,opus
Video codec
Video codec Select to enable video encoding:H264
Media Setting
DTMF Payload Type Enter
the DTMF payload type, the value must be
96~127.
Headset Mic Gain
Set the earphone's radio volume gain to fit
different models of earphones.
133