User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
Opus playload type Set Opus load type, range 96~127.
OPUS Sample Rate
Set Opus sampling rate, including opus-
nb (8KHz)
and opus-wb (16KHz).
ILBC Payload Type Set the ILBC Payload Type
, the value must be
96~127.
ILBC Payload Length Set the ILBC Payload Length
Onhook Time
Configure a minimum response time, which
defaults to 200ms
Enable the patting spring to generate Flash
Whether to turn on the plug spring to generate
Flash
Video bit rate
Set the bit rate of video:64kbps ， 192kbps ，
256kbps，384kbps，512kbps，768kbps，1Mbps
，
1.6Mbps，2Mbps，3Mbps，4Mbps
Video frame rate
Set the video frame rate：5fps，10fps，15fps，
20fps，25fps，30fps
Video resolution
Set Video resolution：CIF,VGA,4CIF,720P
H.264Payload Type
Set the H264 Payload Type，
the value must be
96~127.
Display splicing frame Whether to start displaying splicing frames
RTP Control Protocol(RTCP) Settings
CNAME user Set CNAME user
CNAME host Set CNAME host
RTP Settings
RTP keep alive Hold the call and send the packet after 30s
Alert Info Ring Settings
Value Set the value to specify the ring type.
Ring Type Type1-Type9
12.11 Phone settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in
multicast group. User can configure a multicast DSS Key on the phone, which allows
user to send a Real Time Transport Protocol (RTP) stream to the pre-configured
multicast address without involving SIP signaling. You can also configure the phone to
receive an RTP stream from pre-configured multicast listening address without involving
134