User's Manual
Table Of Contents
- User Manual
- 1 Picture
- 2 Table
- 3 Safety Instruction
- 4 Overview
- 5 Install Guide
- 6 Appendix Table
- 7 Introduction to the User
- 8 Basic Function
- 9 Advance Function
- 10 Phone Settings
- 11 Web Configurations
- 12 Network >> Basic
- 12.1 Network >> Service Port
- 12.2 Network >> Advanced
- 12.3 Line >> SIP
- 12.4 Line >> SIP Hotspot
- 12.5 Line >> Dial Plan
- 12.6 Line >> Action Plan
- 12.7 Line >> Basic Settings
- 12.8 Line >> RTCP-XR
- 12.9 Phone settings >> Features
- 12.10 Phone settings >> Media Settings
- 12.11 Phone settings >> MCAST
- 12.12 Phone settings >> Action
- 12.13 Phone settings >> Time/Date
- 12.14 Phone settings >> Tone
- 12.15 Phone settings >> Advanced
- 12.16 Phonebook >> Contact
- 12.17 Phonebook >> Cloud phonebook
- 12.18 Phonebook >> Call List
- 12.19 Phonebook >> Web Dial
- 12.20 Phonebook >> Advanced
- 12.21 Call Logs
- 12.22 Function Key >> Function Key
- 12.23 Function Key >> Softkey
- 12.24 Function Key >> Advanced
- 12.25 Application >> Manage Recording
- 12.26 Security >> Web Filter
- 12.27 Security >> Trust Certificates
- 12.28 Security >> Device Certificates
- 12.29 Security >> Firewall
- 12.30 Device Log >> Device Log
- 13 Trouble Shooting
- FCC 一般产品警示语 大于20cm
Picture 41 - Attended transfer
8.14 Call Waiting
Enable call waiting: new calls can be accepted during a call.
Disable call waiting: new calls will be automatically rejected and a busy tone will
be prompted.
Enable call waiting tone: when you receive a new call on the line, the tone will
beep.
The user can enable/disable the call waiting function in the phone interface and the
web interface.
Phone interface：Press [Phone Settings] >> [Call] >> [Call], enable/disable call
waiting and call waiting tone.
50