User Manual
6
7
OPERATION
NOTE: Make sure the appliance is switched o (set the temperature control knob to
0 ) and the wae plate is closed before connecting it to a wall outlet.
Place the appliance on a clean, at and heat resistant surface.•
Insert the plug • (8) into a wall outlet (ill.
b
). The POWER indicator (12) and
READY indicator (11) turn on.
Set the required browning level with the temperature control knob • (10). The
READY indicator (11) turns o.
The appliance will now preheat to the preset temperature. Once the set •
temperature has been reached, the READY indicator (11) will turn on. The
time is about 3 to 5 minutes, which is subject to the temperature control knob
setting.
Unlock the latch • (2) by pressing on its upper part. Lift the upper wae plate (3)
it into a vertical position using the handle (1) (ill.
c
).
Apply cooking spray or spray butter on the wae plates • (3, 5). Now the
appliance is ready for baking waes.
Baking waes
Using the measuring cup • (6), pour half a cup of batter onto each wae square
(ill.
f
).
NOTE: Do not overll the wae forms, as any access batter may leak out of the
appliance. During the cooking process, the READY indicator (11) will turn on and
o several times to ensure a constant temperature.
Lower the upper wae plate • (3) and lock it in place (ill.
g
). Make sure the
appliance is fully closed and the latch (2) has locked in place.
Waes are done in about 3 to 6 minutes, depending on recipe, or when •
steaming begins to stop.
Open the appliance (ill. •
h
), as previously described, and remove the waes
using a plastic or wooden utensil (ill.
i
).
NOTE: Never use any metal utensils, as these will damage the nonstick coating.
After removing the waes, keep the wae plate closed, so that the heat •
remains inside the appliance for the next set of waes. Wait until the READY
indicator (11) lights up again. Repeat previous steps.
Unplug the appliance when you are done with preparing waes (ill. •
j
). Both
indicator lights switch o.
Allow appliance to cool down completely before handling again. •
Waffle Maker_103739_IM_US_V4_121204.indd 7 12/4/12 9:46:39 AM