Use and Care Manual

12. MEMORY FUNCTION

(1) Press "Memory " icon to choose memory 1-3 procedure. The screen will display "MEMORY1",

"MEMORY2", then "MEMORY3".

(2) If the procedure has been set, press " " to use it. If not, continue to set the

procedure. Only one or two microwave stages can be set.

(3) After finishing the setting, press "Memory " to save the procedure and turn back to the standby

modes. Press " " to save and operate the setting.

EXAMPLE: To set the following procedure as the second memory, that is memory 2, and cook the

food with 80% microwave power for 3 minutes and 20 seconds. Follow these steps:

A. In standby mode, press "Memory " icon twice until "MEMORY2" displays.

B. Press "MICROWAVE" three times, "M P80" displays.

C. Press " " to set the power

D. Press " ", " ", " ", or " " to adjust the cooking time to 3minutes and 20 seconds.

E. Press "Memory " icon to save the setting and the oven will beep once.

NOTE:

(1) Weight defrost or Auto menu cooking cannot be set as memory procedure.

(2) If the power is not cut off , the procedure will be saved in memory. If power is lost, the

memory setting needs to be reset.

13. MULTI-STAGE COOKING

At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then

defrosting shall be placed at the first stage automatically.

Note: Auto menu cannot work in the multi-stage cooking.

Example: if you want to defrost food for 5 minutes then cook at 80% microwave power for 7

minutes. The steps are as follows:

(1) Press "WEIGHT/TIME DEFROST" 4 times, The screen will display "TIME DEFROST"

(3) Press " ", " ", " ", or " " to set defrosting time to 5 minutes

(4) Press "MICROWAVE" three times to select 80% microwave power.

(5) Press " " to set microwave power

(6) Press " ", " ", " ", or " " to set cooking time of 7 minutes

(7)

Press " " to start cooking.

14. INQUIRING FUNCTION

(1) In the microwave cooking mode, press "MICROWAVE" to check microwave power level, and

the current microwave power will be displayed. After 3 seconds the microwave will return to its

previous mode. The same method can be used to check power in the multi-mode cooking mode.

(2) Press "KITCHEN TIMER/CLOCK" to check the current time. Current time will be displayed for 3 seconds.

15. LOCK FUNCTION FOR CHILDREN

(1) Lock: In standby mode, press "STOP/CANCEL " for 3 seconds, there will be a long "beep"

denoting the entering into the children-lock mode; the lock indicator will light and the screen

will display current time or "LOCKED".

(2) Unlock: In locked mode, press "STOP/CANCEL " for 3 seconds, there will be a long "beep"

denoting that lock is released.

(2) Press " " to confirm the function and the screen will display "TD 0:00".

+ 30SEC