User Manual
Table Of Contents
17
Note:
Auto menu can not be set in memory function.
(2) Iftheprocedurehasbeenset,press touseit.Ifnot,continuetoset
the procedure. Only one or two stages can be set.
(3) Iftheprocedurehasnotbeenset,afternishingthesetting,press
once to
save
the
procedureandturnbacktothewaitingstates.Ifyou press “START/+ 30SEC“ it will start
cooking at once and save the procedure too.
Example:
To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3minutes and 20 seconds
The steps are as follow:
a. Inwaitingstates,press“0/MEMORY”twice,stoppressinguntilthescreendisplays“2”.
b. Press“TIME COOK“once,thenpress“3”,”2”,”0”inorder.
c. Press“POWER“once,”PL10”displays,thenpress“8”and“PL8”displays.
d.
Press “START/+ 30SEC“ once to save the setting. Buzzer sounds once then screen displays “2”.
Pre
ss “START/+ 30SEC“ again, and the procedure will be operated as the memory 2.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the procedure
will need to
be reset.
f. Whenyouwanttorunthesavedprocedure,inwaitingstates,press
twice,screen
“0/MEMORY”
“START/
+
30SEC“
displa
ys“2”,thenpress
“START/+ 30SEC“
tostartcooking.
“START/
+
30SEC“
soundsvetimesand
then turns back to waiting state.
B. BEEF MENU
Press “MEAT“ twice to choose beef menu,“BEEF“ displays
Press“START/+ 30SEC“ to confirm menu, 12.0 displays
Keep pressing “MEAT“ to choose beef weight 19.0, 26.0, 33.0 or 40.0 Oz" can be selected
7YLZZ¸:;(9;:,*¸[VJVVRI\aaLYZV\UKZVUJL>OLUJVVRPUNPZMPUPZOLKI\aaLY
18.
MEMORY FUNCTION
(1) Press“0/MEMORY”tochoosememory1-3procedure.Thescreenwilldisplay1,2,3.
C. Pork MENU
Press “MEAT“ three times to choose pork menu,“PO“ displays
Press“START/+ 30SEC“ to confirm menu, 6.0 displays
Keep pressing “MEAT“ to choose pork weight 11.0, 16.0, 21.0 or 26.0 Oz" can be selected
7YLZZ[VJVVRI\aaLYZV\UKZVUJL>OLUJVVRPUNPZMPUPZOLKI\aaLY
soundsfivetimesandthen
turns ba
ck to waiting state.