Instruction Manual

4
FOR BEST RESULTS
• Check garment labels for the temperature and steam setting
recommended by the fabric manufacturer.
• To prevent damaging garments from too hot of an Iron, it is best
to first iron garments that require a low temperature. If you
should need to switch from a high setting to a lower
temperature, for example, cotton to nylon, allow
the Iron about 5 minutes to reach the lower temperature.
• If you are unsure of a garment's fabric content, start on a low
setting and test the Iron on an area of the garment that does not
show, such as a seam. Gradually increase the heat setting until
wrinkles remove without damaging the fabric.
• To prevent shine, iron dark garments, or those made of silk,
acetate or rayon, inside out.