MD-1210CM 12.
Contents Caution 4 Features and Controls Monitor/DVD Player Remote Control 6 6 8 Power and Mode Selection Releasing The Monitor Turning on The Monitor Mute Function 10 10 10 10 Selecting an AV mode 11 Picture Control Contrast/Brightness/Color/FM 12 12 13 13 14 14 14 14 15 15 15 DVD Setup Setup Menu General Setup TV Aspect Ratio Angle Viewing OSD Language Captions Screen Saver Last Position memory Audio Setup Speaker Setup Equalizer Settings Preferences Setup TV Type Parental Audio Subtitle Default
SPECIFICATIONS Caution Please read and observe all warnings and instructions in this manual and those marked on the unit. Retain this booklet for future reference. There are two kinds of alarm symbols as follows: The lightning bolt with arrowhead inside in an equilateral triangle is intended to alert the user to the presence of , dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to WARNING people.
Caution Troubleshooting CAUTION Symptom Items to Check Actions to be Taken Buttons do not work. Is the power turned on? Check the car battery capacity. No sound Is the audio which is connected with the audio cable set to receive the DVD signal output? Is audio cable is connected securely? Is the monitor which is connected with the audio cable turned on? Is the digital audio output set in the correct position? Select the correct input mode for the audio receiver.
Monitor / Player System Components Disc Information DVD features DVD discs provide high-resolution images with high-quality sound and surround sound effects. This DVD player can play not only DVD discs of various versions, but also S-VCD, VCD, audio CD and MP3 discs. iP Discs that cannot be played OD MO NI TO R DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. In addition, a CD or a CD-RW which was recorded on special software cannot be played.
Installation Features And Controls POWER Button PLAY/PAUSE Button MENU Button 1. Open the package and check that these items are presents. M PLAY UNIT INSTALLATION PLATE SCREW A AV MENU POW ER SCREW B FAST Forward/Reverse Button 2. Connect the external compoments to the RCA cable or AV output. (Refer to the connection diagram on page 29) Dome Light Button Dome Light Button AV Select Button +/- Buttons 3.Match the position of installation bracket and installation plate with screw A.
Connection Diagram Features and Controls Remote Control 2 3 POWER Turns the DVD Player/Monitor on or off. MUTE Press this button to switch off the audio during playback. Press again to restore the audio. (iPOD) To start playback of iPOD, press this button. Press again to pause the playback. If playback is paused, press this button to resume playback.
SD/USB/iPOD Functions 1. When USB or SD is inputed, the monitor will be displayed as shown below. But when you input USB that the function can not change into SD S state (only the SD is moving). And you can select the desired menu by pressing the MODE button on the remote control of monitor. 2. Use the (arrow and ENTER) buttons to select and set desired settings. 00:00 00:00 kbps 000/003 \ Name And Function Of Each Part RETURN Press this button to return root menu.
Power And Mode Selection DVD Functions PBC Releasing The Monitor [DVD]/[AUDIO]/[MP3] Push the release button (located on the front edge of the screen housing) and l o w e r t h e m o n i t o r. Yo u c a n a l s o a d j u s t t h e s w i v e l a n g l e . This button does not function in PBC mode. M PLAY AV MENU POWER Make this arrow in DOWN direction only. [VCD] You can turn the PBC (Play Back Control) function on or off by pressing this button.
Power and Mode Selection DVD Functions Selecting an AV mode Repeat 1. Turn the power ON on the unit and on the external devices. [DVD] [AUDIO] Pressing REPEAT button changes the play mode as follows: Pressing REPEAT button changes the play mode as follows: OSD Chapter Title All CONDITION OSD CONDITION Repeat chapter Track Repeat single Repeat title All All 2. Select the DVD, iPOD, AV1 or AV2 mode by pressing the AV Select button on the unit or on the remote control. 3.
Picture Control DVD Functions Contrast/Brightness/Color/FM Prev( To adjust CONTRAST, BRIGHTNESS, COLOR or FM press the MENU button until you arrive at the screen for that item. Use the arrow buttons to adjust the value. Press the MENU button to make another adjustment or leave the MENU system. [DVD]/[VCD] 1. Bring up the on-screen function menu by pressing the MENU button on the unit or the remote control. 2.
DVD Setup DVD Functions Fast Reverse Searching( ) Setup Menu-Main Page [DVD] [AUDIO] Pressing FR button repeatedly changes the play mode as follow: Pressing FR button repeatedly changes the play mode as follow: OSD CONDITION FR 2X 2X rewind search FR 4X 4X rewind search FR 8X 8X rewind search FR 16X 16X rewind search FR 32X 32X rewind search PLAY Play OSD CONDITION FR 2X 2X rewind search FR 4X 4X rewind search FR 8X 8X rewind search FR 16X 16X rewind search FR 32X 32X rewind
DVD Setup DVD Functions General Setup Subtitle(SUB-T) 1. TV Aspect Ratio In the Setup function called TV Display, you set the player to output the video signal at the same aspect ratio as your monitor. If the monitor is widescreen format, select WIDE. If it is as normal screen (4:3), choose NORMAL/PS (Pan and Scan) or NORMAL L/B (Letterbox). Normal / PS 4:3 PAN SCAN Choose this setting if you want the movie to fill the entire screen.
DVD Setup DVD Functions Display Audio Setup [DVD] [AUDIO] Pressing the DISPLAY button on the remote control changes the play mode as follows: Pressing the display button displays information about the current CD on the screen as follows: OSD CONDITION OSD CONDITION Title Elapsed Display the Title Elapsed Single Elapsed Display the single elapsed Title Remain Display the Title Remain Single Remain Display the single remain Chapter Elapsed Display the Chapter Elapsed Total Elapsed Displa
DVD Functions DVD Setup Downmix Use this function to set the input audio signal to match your speaker setup. Front Speaker Use this function to change the setting from the factory. General Setup Page Downmix Front Speaker VRS LRG General Setup Page Downmix Front Speaker LT/RT Stereo V SURR Off VRS LRG Larege Stop( ) [DVD]/[AUDIO] In DVD mode, Press STOP to stop playback. To resume playback, press PLAY/PAUSE.
DVD Setup DVD Functions Eject Preference When this button is pressed, the disc is ejected. When this button is pressed for more than 3 seconds, the disc is unconditionally ejected. So, you can use this function when you encounters not ejected situation due to unknown reasons. Vol+/Vol- Choose the proper TV format appropriate to the monitor you have connected to the player from the following: NTSC, PAL or Multi type. 1. Press the SETUP button during stop mode. 2.
DVD Setup DVD Setup Password Setup 4. Subtitle In the Subtitle menu, you can select a subtitle language. Please note that subtitle will only appear in this language if the disc programming has included it. 1. Press the SETUP button during stop mode. 2. Press the / buttons to move to Preference. 3. Press the / buttons to move to Subtitle. 4. Press the ENTER button. 5. Press the / buttons to select desired subtitle. 1.
