HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.
RESTRICTED USE ONLY Fargo Electronics, Inc. HDP5000 High Definition Card Printer/Encoder User Guide (Rev 1.5), property of HID/Fargo Electronics, Incorporated © 2009 HID Global Corporation. All rights reserved. Exclusive permission is granted to authorized resellers of HID Global products to reproduce and distribute this copyrighted document to authorized HID Global customers, who have signed a “no disclosure agreement” regarding the restricted, proprietary use of said document.
RESTRICTED USE ONLY Fargo Electronics, Inc.
RESTRICTED USE ONLY Fargo Electronics, Inc. Selecting the Diagnostics button ______________________________ Error! Bookmark not defined. Printing a Test Print Image _____________________________________ Error! Bookmark not defined. Selecting the About button _____________________________________ Error! Bookmark not defined. Selecting the Toolbox button____________________________________ Error! Bookmark not defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing Information on the Supplies tab ______________________ Error! Bookmark not defined. Accessory Procedures ____________________________________ Error! Bookmark not defined. Using the Security Lock Slot on the HDP5000 ______________________ Error! Bookmark not defined. Installation and Removal Procedures Flipper Module Accessory ________ Error! Bookmark not defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. Specifying TCP Event logging ________________________________ Error! Bookmark not defined. Using the Administration pages _________________________________ Error! Bookmark not defined. Using the System Information page ____________________________ Error! Bookmark not defined. Changing the Root Password _________________________________ Error! Bookmark not defined. Using the Reboot pages________________________________________ Error! Bookmark not defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. Selecting the Calibrate Laminator tab _____________________________ Error! Bookmark not defined. Selecting the Calibrate Film tab _______________________________ Error! Bookmark not defined. Selecting the Calibrate Ribbon tab _______________________________ Error! Bookmark not defined. Selecting the Clean Printer tab __________________________________ Error! Bookmark not defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. Fluorescent Panel Usage__________________________________ Error! Bookmark not defined. Configuring Fluorescent Data using the Workbench (F-Panel for YMCFK Ribbon) Error! Bookmark not defined. Configuring Fluorescent Data using the Application (F-Panel for YMCFK Ribbon) Error! Bookmark not defined. Inhibit Panel Usage______________________________________ Error! Bookmark not defined.
RESTRICTED USE ONLY Fargo Electronics, Inc. Formatted: Bullets and Numbering Printer Overview HDP5000 Process Flow (in table format) Reviewing the HDP5000 Boot-up Sequence Step Process 1 The Card feed stepper turns ON (to check for a card in the card path). 2 The Lam Headlift turns until the head up position is returned from the Headlift Sensor). 3 The Film transfer take-up Motor turns ON to take up any slack in the film.
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the HDP5000 Sequence of Operations The following sequence describes a dual-sided, full color print job with magnetic encoding. Step Process 1 The File information is received from the PC. 2 The Heater warms up and/or maintains the heat on the hot Roller using the RTD (Resistive Thermal Device) to help maintain the desired temp.
RESTRICTED USE ONLY Fargo Electronics, Inc. 13 The Ribbon Drives, Film Drive and Print Platen Stepper turn ON and the Printhead burns the image data until the image data is depleted. All stop. (Note: The Ribbon Encoders and Film Encoders are active during this step.) 14 The Headlift Motor engages, moving the Printhead up until the Headlift Sensor is activated. All stop. The Film Drive reverses the Film Position Sensor to print over the image (again).
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Lamination Module Boot-up Sequence Step Process 1 The Lam Headlift turns until the head up position is returned from Headlift Sensor. 2 The Lamination Ribbon Motor activates. (Note: The RFID determine the presence of a roll of lamination.) 3 The Card Sensor checks for the presence of a card and ejects it if found.
RESTRICTED USE ONLY Fargo Electronics, Inc. Formatted: Bullets and Numbering Specifications The purpose of this section is to provide the User with specific information on the Regulatory Compliances, Agency Listings, Technical Specifications and Functional Specifications for the HDP5000 and HDP5000-LC Printers. Safety Messages (review carefully) Symbol Critical Instructions for Safety purposes Danger: Failure to follow these installation guidelines can result in death or serious injury.
RESTRICTED USE ONLY Fargo Electronics, Inc. Regulatory Compliances Term Description CSA The Printer manufacturer has been authorized by UL to represent the Card Printer as CSA Certified under CSA Standard C22.2 No. 60950-1-03. (cUL) File Number: E145118 FCC The Card Printer complies with the requirements in Part 15 of the FCC rules for a Class A digital device. UL The Card Printer is listed under UL IEC 60950-1 (2001) INFORMATION TECHNOLOGY EQUIPMENT.
RESTRICTED USE ONLY Fargo Electronics, Inc. FCC Rules This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
RESTRICTED USE ONLY Fargo Electronics, Inc. Traditional Chinese RF Emissions and Safety Statements HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.
RESTRICTED USE ONLY Fargo Electronics, Inc. Technical Specifications Term Description Accepted Card Thickness • Print only: .030" (30 mil) to .050" (50 mil) / .762mm to 1.
RESTRICTED USE ONLY Fargo Electronics, Inc. Standard Card Size in mm (HDP5000 Printer Driver > Card tab) Card Size (Custom selection) Sets Custom Card Size when closing dialog box. • Print Width default = 2.440, upper limit = 2.440, lower limit = 1.000, cannot be null • Print Length default = 3.704, upper limit = 3.704, lower limit = 3.000, cannot be null Changing back to CR-80 resets to CR-80 defaults.
RESTRICTED USE ONLY Fargo Electronics, Inc. Colors (dpi) 300 dpi (11.8 dots/mm) Dimensions • HDP5000: 11.50"H x 12.25"W x 9.25"D / 292mmH x 313mmW x 235mmD • HDP5000 + Dual-Sided Module: 11.50"H x 17.50"W x 9.25"D / 292mmH x 445mmW x 235mmD • HDP5000 + Single-Sided Lam Module: 12.75"H x 25"W x 9.25"D / 324mmH x 635mmW x 235mmD • HDP5000 + Dual-Sided Module + Dual-Sided Lam Module: 12.75"H x 30"W x 9.25"D / 324mmH x 762mmW x 235mmD • Lam Module: 12.75"H x 12.25"W x 9.
RESTRICTED USE ONLY Fargo Certified Supplies Fargo Electronics, Inc. Fargo Card Printer/Encoder requires highly specialized media to function properly. To maximize printed card quality and durability, Printhead life and Printer/Encoder reliability, use only Fargo Certified Supplies, Fargo warranties are void, where not prohibited by law, when non-Fargo Certified Supplies are used.
RESTRICTED USE ONLY Fargo Electronics, Inc. Memory 16MB RAM Operating Temperature 65º F to 90º F (18º C to 32º C).
RESTRICTED USE ONLY Print Ribbon Options Fargo Electronics, Inc.
RESTRICTED USE ONLY Fargo Electronics, Inc. Resolution 300 dpi (11.8 dots/mm) Single Wire USB 2.
RESTRICTED USE ONLY Fargo Electronics, Inc. • Windows 2000, Windows XP, Windows 2003, Vista (32 bit only) • 500MHz computer with 256MB of RAM or higher • 500MB free hard disk space or higher Warranty Printer: Two year (including On-Call Express, U.S. only); optional Extended Warranty Program (U.S. only); see below for more detail. • Two (2) Year Factory Warranty • Covers parts and depot repair • First year On-Call-Express (loaner printer) • 2nd year On-Call-Express available for a fee.
RESTRICTED USE ONLY Fargo Electronics, Inc. Functional Specifications The Card Printer utilizes two different, yet closely related printing technologies to achieve its remarkable print quality for dye-sublimation and resin thermal transfer. The following describes how each of these technologies works: Function Description DyeSublimation Dye-Sublimation is the print method the Card Printer uses to produce smooth, continuous-tone images that look photographic.
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: Resin Thermal Transfer to USB Interface Port Component Description Resin Thermal Transfer Resin Thermal Transfer is the print method the Printer uses to print sharp black text and crisp bar codes that can be read by both infrared and visible-light bar code scanners.
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: LCD and Softkey Control Pad The Printer provides a two line, thirty-two (32) characters LCD Display that can communicate helpful information about the Printer's operation. The bottom line of the LCD Display will always be used to communicate the current function of the Printer's softkey buttons. This section describes how the LCD Display and Softkey Control Pad work together.
RESTRICTED USE ONLY Fargo Electronics, Inc. • TRANSFERRING: Indicates the Printer is transferring an image to a blank card. • LAM: Indicates the Lamination Station is applying an overlaminate to a card (appears only if using a Printer equipped with the optional Card Lamination Module. The Print Status screen always displays Cancel in the lower left and Pause in the lower right. The Cancel button Use this button to cancel print jobs and reset the Printer for the next print job.
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: Print Ribbons The Card Printer utilizes both dye-sublimation and/or resin thermal transfer methods to print images (print to film and transfer film to card). Since the dye-sublimation and the resin thermal transfer print methods each provide their own unique benefits, Print Ribbons are available in dye-sublimation-only and combination dye-sublimation/resin versions.
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: Blank Cards Caution: Never run cards with a contaminated, dull or uneven surface through the Printer. Printing onto such cards will ultimately lead to poor print quality. Always store the card stock in its original packaging or in a clean, dust-free container. Do not print onto cards that have been dropped or soiled. Type Description Card Size These Card Printers accept standard CR80 sized cards (3.375L x 2.125W / 85.
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: Card Input and Output Hoppers Type Description Card Cartridge The Card Cartridge will hold a maximum of 100 cards (based on a standard 30 mil card thickness). Printer Components: Card Output Hopper and Reject Hopper Type Description Card Output Hopper HDP5000/HDP5000-LC: All standard HDP Card Printers provide a 200 card capacity Card Output Hopper (based on a standard 30 mil card thickness).
RESTRICTED USE ONLY Fargo Electronics, Inc. Printer Components: Transfer Roller Danger: The Printer’s Transfer Roller can reach temperatures exceeding 350 degree F (175 C). Use extreme caution when operating the Transfer Roller. Never touch the Transfer Roller unless the Printer Power has been turned off for at least 20 to 30 minutes. Type Description Controls Both the Printer itself and the Printer’s software Driver control the built-in Transfer Roller.
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Overlaminates Important! Fargo Card Printers require highly specialized overlaminates to function properly. To maximize Printer life, reliability, printed card quality and durability, you must use only Fargo Certified Supplies. For this reason, the Fargo warranty is void, where not prohibited by law, if you use non-Fargo Certified Supplies. To order additional materials, please contact the authorized reseller.
RESTRICTED USE ONLY Fargo Electronics, Inc. Reviewing the Overlaminate Design Term Description Cross Reference Design Both PolyGuard and the Thermal Transfer Film overlaminates are available in either a clear or generic secure holographic-type design. (Note: Custom holographic-type overlaminates are also available with specific designs, patterns, logos and security features.) See the Loading the Overlaminate. . Please contact the authorized reseller for more information about custom Overlaminates.
RESTRICTED USE ONLY HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5) Fargo Electronics, Inc.
RESTRICTED USE ONLY Fargo Electronics, Inc. Display A – See the HDP5000 Printer Installation Guide HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.
RESTRICTED USE ONLY Fargo Electronics, Inc. Display B – See the HDP5000 Printer Installation Guide HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.
RESTRICTED USE ONLY Fargo Electronics, Inc. Choosing a Good Location Follow these guidelines: • Place the unit in a location with adequate air circulation to prevent internal heat buildup. • Use the Printer's dimensions as a guideline for the minimum clearances to the unit. (Note: Allow for adequate clearance above the unit to accommodate the height of the unit with its Covers open.
RESTRICTED USE ONLY HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.5) Fargo Electronics, Inc.
