User's Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30e Card Printer User Guide (Rev. 1.1)
5-6
Telnet Command Command Purpose Command Format
user Display information about the
defined User names and their type
(root or guest privileges).
list user
lpq Display information about print
jobs and their settings.
list lpq
printer Display information about the
Printer (i.e., model number,
Firmware version and serial
number).
list printer
printer sm Display information about the
secure mark settings of the
Printer.
list printer sm
cont
act
Set the contact string. set sysinfo label
[<STRING>]
locat
ion
Set the location string. set sysinfo location
[<STRING>]
label Set the label string. set sysinfo label
[<STRING>]
sysinf
o
from Set all strings from default or
current settings.
set sysinfo from
default|current
nam
e
Change the name of a system log
path
set syslog <LOG_NAME>
name <NEW_NAME>
type Change the type of a system log
path. This starts or stops logging
on start of jobs or on faults.
set syslog <LOG_NAME>
type [[-]job] [[-]pfault]
dest Change the destination of a
system log path. This may be set
to none, e-mail, udp or tcp.
set syslog <LOG_NAME>
dest none|email|udp|tcp
emai
l
Change the e-mail address for e-
mail notification for a system log
path. It must specify a valid e-mail
address.
set syslog <LOG_NAME>
email <EMAIL>
set
syslog
udp Specify the IP address of the UDP
system logging program.
set syslog <LOG_NAME>
udp <IPADDRESS>