User's Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30e Card Printer User Guide (Rev. 1.1)
5-15
Reviewing Frequently-asked Questions (continued)
Question Answer
Can I use IP Tracer to
locate Printers on a
different network segment?
No. The IP Tracer can only locate Printers located in the
same network segment (as the PC running IP Tracer).
How do I upgrade the
Printer Firmware in my
Ethernet-enabled Printer?
This is done in the same manner as a USB connected
Printer. The PC doing the upgrade must have a Driver
installed for the Fargo Printer to be upgraded.
Follow this procedure.
1. Run the Fargo Workbench Printer Utility from the start
menu: Go to the Start -> Programs -> Fargo -> Fargo
Workbench Printer Utility -> Fargo Workbench.
2. Select the Fargo Printer to upgrade from the drop-
down box.
3. Go to the Firmware Updates tab.
4. If you need to download the update file from the
Internet, select the Download Firmware button.
5. Choose the update file with the Select Firmware
button.
6. Put your Printer into the upgrade mode. See the
instructions for your specific Fargo Printer.
7. Select the Send Firmware button.