User's Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30e Card Printer User Guide (Rev. 1.1)
5-18
Reviewing Frequently-asked Questions (continued)
Question Answer
How do I configure my
Printer’s IP settings?
By default, the Printer is configured for dynamic IP
address assignment. That is, it will try to get its IP address
and other settings from your network. If it is given valid
network settings, it will use them.
OR
You can choose to configure the Printer, using a static IP
address and network settings. (Note: This can be entered
using the Network web page of the Printer or the IP Tracer
program.)
How do I choose a static
IP address for my Ethernet
Printer?
You can use the web pages if you know the current IP
address.
OR
You can use the IP Tracer tool, which allows you to find
Printers and specify their addresses.
(Note: You can save static addresses. However, they are
not used until you reconfigure the Printer to use those
static addresses and reboot the Printer.)
How do I set the Printer to
work with a static IP
address?
You can use the web pages if you know the current IP
address.
• Select the Use the following IP address button on
the Network web page.
OR
• Use the IP Tracer tool, which allows you to find
Printers and specify their addresses.
What do the LEDs by the
Ethernet connection on the
back of the Printer
indicate?
The LEDs indicates network activity. See Verifying the
Printer Connection.