User's Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.

Persona C30e Card Printer User Guide (Rev. 1.1)

6-116

Using the Resin Heat (K) Adjustment (Settings)

Printer uses when printing with the resin black panel(s) of a full-color Ribbon or when printing

with a resin-only Ribbon by adjusting the Resin Heat slide.

Step Procedure

1 Adjust the Resin Heat, Front (K) or the Resin Head, Back (K) as needed.

• Move the slider to the left to cause less heat to be used in the printing

process, causing resin images to be lighter or less saturated.

• Move the slider to the right to (a) cause more heat to be used or (b)

cause the resin image to be darker or more saturated.

(Note: This control can be helpful for fine-tuning the transfer of resin text

and bar codes.)