Instruction Manual

3
8
Safety Information
Never replace the shear bolt OR auger retaining bolt with any length other than what is specified in this
manual. A longer, or protruding fastener is more likely to grab loose clothing or gloves which can result in
serious injury or death.
Clear the work area of objects which might be picked up and thrown or entangled in the auger.
To prevent rapid wear of U-Joints and possible failure of drivelines, never lift auger point more than 12” off the
ground with PTO operating.
To prevent possible instantaneous driveline failure, never move digger from hole-to-hole or transport while
auger is rotating. This could lead to injury from flying pieces of the failed driveline.
Do not operate digger on steep hillsides. When digging on uneven or hilly terrain, position the tractor with the
Post Hole Digger uphill. With the Post Hole Digger downhill, the tractor could tip when attempting to pull the
auger from its hole.
Never position the auger point by hand or with any tool when the tractor is running.
Never position the auger point by putting your hands on the auger, gearbox, boom, or driveline.
Keep hands, feet, hair, jewelry, and clothing, away from all moving and/or rotating parts.
To prevent entanglement and possible serious injury or death, never use body weight to try to push auger into
the ground.
Worn edges or a slightly rounded point can seriously effect auger penetration. Check for wear before each
use, replace as necessary.
Do not shovel dirt away from a rotating auger as the shovel can be caught and thrown by the auger.
Do not operate the Post Hole Digger without all safety shields and guards in place.
Always use care when operating a Post Hole Digger.
Safety is a primary concern in the design, manufacture, sale, and use of Post Hole Diggers. As manufacturers of Post
Hole Diggers, we want to confirm to you, our customers, our concern for safety.
Our current production machines include, as standard equipment, guards or shields for auger adapters, drivelines,
input shafts, and safety signs. Older machines can be retrofitted to add these new guards or shields and, or course,
safety signs. If you have an older machine which does not have current standard safety equipment, please contact
your dealer about bringing your machine up to the current level of safety.
SAFETY SIGNS AND DECALS
LOCATED AT TOP OF AUGER CENTER TUBE
LOCATED ON POST HOLE DIGGER BOOM