User Guide

71
Verify data after recording: Select this option to check whether the
data on the CD/DVD is readable after recording.
Step 3 Click the Next button to open the screen shown below. Select the
CD read method and use data compression if desired. The default read
method “Intelligent Extraction” is successful for most CD formats.
Step 4 Enter a Description of the new VCD in the Description box.
Step 5 (optional) If the CD does not have an Auto-Run then you can specify
a program to run when the VCD is inserted. You can use the Browse button
to locate the executable program.
Step 6 (optional) Choose whether or not to eject the CD from the CD drive
once the Build is complete by checking the ‘Eject the VCD on completion of
the Build process’ box (Figure .4-1b above). Click on Next to continue.
Step 7: If you have only one CD drive (CD recorder), when the image has
been successfully built, VirtualDrive® will prompt you to insert a recordable