Technical Specifications

Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels Section 09 51 01
May 21, 2014 PVC PANELS
Digicon Information Inc. Page 2
C. Panel Samples: Submit [two] [____] samples of each size and color specified.
1.5 QUALITY ASSURANCE
A. Conform to CISCA requirements.
1.6 PROJECT CONDITIONS
A. Section 01 32 13: Work scheduling.
B. Sequence work to ensure ceilings are not installed:
1. until building is enclosed,
2. sufficient heat is provided,
3. dust generating activities have terminated, and
4. overhead work is completed, tested, and approved.
1.7 DELIVERY, STORAGE AND HANDLING
A. Section 01 66 00 for storage and handling of materials.
B. Deliver materials in manufacturer’s original, unopened, undamaged containers with
identification labels intact.
C. Store cartons laid flat, protected from exposure to sun, high temperatures and humidity
conditions as recommended by the manufacturer.
1.8 EXTRA MATERIALS
A. Section 01 78 46: Extra materials.
B. Provide to the Owner a quantity of [5] [____] percent of all panels provided, in each color,
for the Work.
1.9 WARRANTY
A. Warranty: Refer to Section [01 78 00.] [________.]
B. Limited Warranty: Five (5) years from product manufacturing defects.
Part 2 Products
2.1 CEILING PANELS
In the following paragraph, list the manufacturers acceptable for this project. Edit the subsequent
descriptive specifications to identify project requirements and to eliminate any conflict with specified
manufacturer's products.
A. Manufacturers:
1. Fasäde Thermoplastic Ceiling Panels, by Acoustic Ceiling Products (ACP), PO
Box 1581, Appleton, WI, 54912-1581; Phone - Toll Free: 800-434-3750; Fax -