Specification

ManualsBrandsFasade ManualsFlooringCheveron 24.25 in. x 18.25 in. Vinyl Backsplash in Brushed Nickel

Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels Section 09 51 01

May 21, 2014 PVC PANELS

Digicon Information Inc. Page 1

This section includes PVC ceiling panels for surface mounting or t-bar grid, and accessories. Panels are

non-fire rated. This section includes proprietary and descriptive type specifications. Edit to avoid

conflicting requirements. Acoustic ceiling panels specified in another section.

Part 1 General

1.1 SECTION INCLUDES

A. [Surface] [T-bar grid] mounted PVC ceiling panels.

1.2 RELATED SECTIONS

List sections that specify installation of products directly associated with this section; indicate specific

items. In above ceiling mechanical and electrical work, the placement of anchors can be a problem if not

addressed before installation of ceiling suspension assembly. Coordination between the work of

mechanical and electrical sections and the text of this article, requires special consideration.

A. Section 06 11 00 - Wood Blocking: Blocking and shims attached to substrate to support

attached ceiling to a level plane.

B. Section [______-____________]: Placement of special anchors or inserts for supporting

ceiling panels.

C. Section 07 92 00 - Joint Sealants: Acoustic sealant for perimeter edge seal.

D. Section 09 53 33 – Suspended Ceiling Grid: T-bar members for lay-in ceiling grid.

E. Section [______-____________]: [Acoustic] partition system with head rails [attached

to] [within] ceiling assembly.

1.3 REFERENCES

List reference standards that are included within the text of this section. Edit the following as required for

project conditions.

A. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building

Materials.

B. CISCA (Ceilings & Interior Systems Contractors Association):

1. Ceiling Systems Handbook.

2. Acoustic Ceilings: Use and Practice.

1.4 SUBMITTALS FOR REVIEW

Do not request submittals if drawings sufficiently describe the products of this section or if proprietary

specifying techniques are used. Include a requirement for shop drawings only when special project

conditions exist or when reflected ceiling plans are not provided on the working drawings.

A. Section 01 33 00: Submission procedures.

B. Product Data: Provide data on PVC panel construction and cleaning instructions.

Include the following paragraph for submission of physical samples for selection of finish, colour, surface

texture, etc.

Summary of content (5 pages)

PAGE 1
Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels May 21, 2014 Digicon Information Inc. Section 09 51 01 PVC PANELS Page 1 This section includes PVC ceiling panels for surface mounting or t-bar grid, and accessories. Panels are non-fire rated. This section includes proprietary and descriptive type specifications. Edit to avoid conflicting requirements. Acoustic ceiling panels specified in another section. Part 1 General 1.1 SECTION INCLUDES A. 1.
PAGE 2
Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels May 21, 2014 Digicon Information Inc. C. 1.5 Section 09 51 01 PVC PANELS Page 2 Panel Samples: Submit [two] [____] samples of each size and color specified. QUALITY ASSURANCE A. 1.6 Conform to CISCA requirements. PROJECT CONDITIONS A. Section 01 32 13: Work scheduling. B. Sequence work to ensure ceilings are not installed: 1.7 1. until building is enclosed, 2. sufficient heat is provided, 3.
PAGE 3
Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels May 21, 2014 Digicon Information Inc. Section 09 51 01 PVC PANELS Page 3 Toll Free 800-434-3751; e-mail to: support@acpideas.com; Web site: www.acpideas.com. 2. B. C. Substitutions: [Refer to Section 01 62 00.] [Not permitted.] Material: 1. Material: Virgin grade polyvinyl chloride (PVC), 0.76 to 0.81 mm (0.030 to 0.032 inches) thick. 2.
PAGE 4
Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels May 21, 2014 Digicon Information Inc. B. 3.2 Section 09 51 01 PVC PANELS Page 4 Verify that layout of panels will not interfere with other work. INSTALLATION A. Install assembly in accordance with manufacturer's instructions and as supplemented in this section. Include the first paragraph below if a reflected ceiling plan is not included with the drawings; or the subsequent paragraph if a reflected ceiling plan is included. B.
PAGE 5
Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels May 21, 2014 Digicon Information Inc. 3.3 Section 09 51 01 PVC PANELS Page 5 SCHEDULE Provide a schedule when various ceiling locations, ceiling assembly types, acoustic unit designs, or other variables require listing for clarity. Use a table if there are numerous varieties. The following are examples to illustrate a scheduled item: A. Public Areas: 600 x 1200 mm (24 x 48 inch) PVC surface mounted panels, Copper color. B.