Specification

Product Name
Fasade™ Decorative Thermoplastic Panels
Manufacturer’s Name
Acoustic Ceiling Products (ACP)
February 27, 2013 Page 2
PRODUCT DESCRIPTION
○ CISCA (Ceilings & Interior Systems Contractors Association) - Ceiling System Handbook
and Acoustic Ceilings Use and Practice.
• TESTS, AND CERTIFICATIONS
○ Fire Performance: Class A ASTM E 84
■ Non-Foil finishes: Flame spread 10, smoke developed 140, to ASTM E84.
■ Foil-faced finishes: Flame spread 15, smoke developed 250, to ASTM E84.
• PACKAGING, HANDLING, PROTECTION, AND DELIVERY INSTRUCTIONS
○ Deliver materials within original cartons and take care to handle and protect against
unnecessary damages such as moisture, breakage, dirt, surface soiling, etc.
○ Allow all ceiling components to acclimate to room temperatures before installation.
• SPECIAL WARRANTY
○ Limited Warranty: Ten (10) years from product manufacturing defects.
• LIMITATIONS
○ Some finishes may be sensitive to UV light; avoid using in areas of direct sunlight.
○ Certain chemical solvents should be avoided, contact manufacturer for more information.
○ Paint only unfinished panels; paint may not adhere to other finishes.
• AVAILABILITY
○ Nationally and internationally.
• COST
○ Refer to Acoustic Ceiling Products (ACP) and authorized representatives for pricing.
PRODUCT PROPERTIES
• MATERIAL, COMPOSITION, AND DESIGN
○ Material: Virgin grade, rigid, polyvinyl chloride (PVC). Foil-faced finishes use a polyester
coating bonded to the PVC substrate.
○ Laminated components: ABS (acrylonitrile butadiene styrene terpolymer) plastic, laminated
with hot stamping foil
○ Recommended adhesives:
■ Loctite PL Premium Tube adhesive.
■ Latex FRP adhesive.