Use and Care Manual

Use and Care Instructions for
Lay-In Ceiling Panels
What can I use to cut the ceiling tiles?
To cut the ceiling tiles use a utility knife, scissors or a tin snips.
Can the ceiling tiles be cleaned?
Once you have your ceiling installed, the tiles can be cleaned with warm soapy water. Any harsh abrasives or chemicals
will damage the finish on the tiles.
What tools will I need to install the ceiling tiles?
To install your ceiling panels, you will need the following:
 Tape Measure
 Tin Snips or Scissors
 Utility Knife
 Steel Straight Edge
Do I need to install regular acoustic panels behind the lay-in panels?
For 2’ x 2’ Fasade lay-in panels, if sag or lift is an issue, we recommend that the panels are installed underneath a
mineral board ceiling tile or some other material. You can use old mineral board tiles or purchase an economical mineral
board tile for this purpose. THIS IS NOT A REQUIREMENT.