Installation Guide

F1B 7C-16 AUTOMATIC

• Possess the same performances as the Standard Version

• A world-wide patented one trigger system enables the operator

to switch from simple shot to auto re during the operation

• Fewer components in the valve area and its design, which offers

an easy and trouble-free maintenance, make the tool robust and

simple

• One hand control allows the operator to set the desired speed

without leaving the hold on the tool with his hand

• Oversized metal cap and metal insert reduces vibrations and fatigue

while keeping the max. speed (over 1.600 cycles per minute)

STAPLE TYPE

BeA 71, Senco 3G (=C), Atro 7, Bostitch 7

PATENTED

ONE TRIGGER SYSTEM

PAGE 1
PATENTED R SYSTEM ONE TRIGGE F1B 7C-16 AUTOMATIC • Possess the same performances as the Standard Version • A world-wide patented one trigger system enables the operator to switch from simple shot to auto fire during the operation • Fewer components in the valve area and its design, which offers an easy and trouble-free maintenance, make the tool robust and simple • One hand control allows the operator to set the desired speed without leaving the hold on the tool with his hand • Oversized metal cap and meta
PAGE 2
TOOL TYPE TOOL CHARACTERISTICS 1B 7C-16 AUT Height Width Length Weight 167 mm 42 mm 218 mm 1070 g 6.57 inch 1.65 inch 8.58 inch 2.36 lbs Pressure 5 - 7 bar | 70 / 100 psi Air consumption per shot Performances at 90 psi / 6.2 bar (0.62 MPa) Lubricant Aerospace Lubricants Tribolube 12 FASTENER DATA 0.17 l in aut. NOISE VALUE (EN 12549+A1 : 2008, EN ISO 4871 : 2009) LWA,1s : 87.27 dB (A) - KWA,1s , 2.5 LpA,1s : 79.10 dB (A) - KpA,1s , 2.