Brochure

ManualsBrandsFasco ManualsHVAC Supplies1-Speed 1500 RPM 1/15 HP Motor (115V)

Motor replacement job? Get the facts, and get it

right. “Fasco Facts Time-Saving Motor Replacement

Tips” is a comprehensive, easy-to-use reference

handbook that will save you time and effort.

In it, you’ll find detailed information on

identification, selection and installation of

the proper replacement motor. “Fasco Facts”

is based on the real-life experiences and

knowledge of professional service personnel

and service organizations.

The 56-page booklet contains five sections:

Electrical Characteristics of FHP Motors,

Mechanical Characteristics of FHP Motors,

Motor Replacement Procedures, Rules of

Thumb, Glossary of Electrical and Motor Terms.

For your free copy of “Fasco Facts”

contact Fasco Distributing Company.

Handy

Guidebook

Provides

Helpful Tips

D1005, pages 30, 69

D1006, pages 27, 68

D1008, page 63

D1102, pages 16, 70

D1120, D1121,

pages 16, 61

D1733, D1734, D1735,

page 40

A168, pages 25, 71

A085, pages 23, 60

A169, pages 23, 59

A170, pages 23, 59

B22508, page 82

D177, pages 31, 63

New Products

3.3" DIAMETER

General Purpose Motors

D2710, D2713, D2714,

page 39

D2711, page 39

D2712, D2715, D2720,

D2721, page 39

D2729, page 39

D2750, D2751, D2752,

D2753, page 39

D2800, page 65

Summary of content (101 pages)

PAGE 1
3.3" DIAMETER General Purpose Motors Motor replacement job? Get the facts, and get it right. “Fasco Facts Time-Saving Motor Replacement Tips” is a comprehensive, easy-to-use reference handbook that will save you time and effort. Handy Guidebook Provides Helpful Tips In it, you’ll find detailed information on identification, selection and installation of the proper replacement motor.
PAGE 2
MOTOR SCOPE Selection Guide The Motor Scope has been developed to help identify all the possible solutions for applications requiring replacement motors. The motors in this guide are first grouped by motor type. Within these types, the models are then sorted by Type, Diameter, HP and Volts. Simply select all the possible models using these specifications to get a preliminary list of models. Next, refer to the catalog pages where these models appear to determine the best choice.
PAGE 3
MOTOR SCOPE Selection Guide PERMANENT SPLIT CAPACITOR MOTORS - 5" AND 5.1" DIAMETER FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D1089 5 1/15 115 850 1 PSC 1.3 OPEN VENTILATED REVERSIBLE SLV 1/2 X 3 D1051 5 1/25 - 1/40 115 1060 - 500 2 PSC .6 - .4 OPEN VENTILATED DBL SHFT SLV 11-1/8 X 1/2 X 11-1/8 D382 5 1/25 - 1/40 - 1/50 115 1050 3 PSC .6 - .4 - .
PAGE 4
MOTOR SCOPE Selection Guide PERMANENT SPLIT CAPACITOR MOTORS - 5.6" DIAMETER (continued) FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS D797 5.6 1/4 208 - 230 825 1 PSC 1.8 OPEN VENTILATED REVERSIBLE SLV 1/2 X 6 D934 5.6 1/4 208 - 230 825 1 PSC 1.9 TOTALLY ENCLOSED REVERSIBLE SLV 1/2 X 6 D829 5.6 1/4 115 825 1 PSC 3.8 OPEN VENTILATED REVERSIBLE SLV 1/2 X 2 D796 5.6 1/3 208 - 230 825 1 PSC 2.6 OPEN VENTILATED REVERSIBLE SLV 1/2 X 6 D936 5.
PAGE 5
MOTOR SCOPE Selection Guide PERMANENT SPLIT CAPACITOR MOTORS - 5.6" DIAMETER (continued) FASCO DIAMETER MODEL (IN.) D HP VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D904 5.6 1/4 - 1/5 208 - 230 1075 2 PSC 1.8 - 1 TOTALLY ENCLOSED REVERSIBLE SLV 1/2 X 6-1/2 D749 5.6 1/4 208 - 230 1075 1 PSC 1.8 OPEN VENTILATED REVERSIBLE SLV 1/2 X 6-1/2 D7749 5.6 1/4 208 - 230 1075 1 PSC 1.7 OPEN VENTILATED REVERSIBLE BALL 1/2 X 6-1/2 D1703 5.
PAGE 6
MOTOR SCOPE Selection Guide PERMANENT SPLIT CAPACITOR MOTORS - 5.6" DIAMETER (continued) FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D1735 5.6 1/2 - 1/3 - 1/4 208 - 230 1075 3 PSC 3.4 - 2.5 - 1.9 OPEN VENTILATED REVERSIBLE SLV 1/2 X 6 D1700 5.6 1/2 - 1/3 208 - 230 1075 2 PSC 3.7 - 1.9 TOTALLY ENCLOSED REVERSIBLE BALL 1/2 X 5-1/2 D804 5.6 1/2 208 - 230 1075 1 PSC 5.
PAGE 7
MOTOR SCOPE Selection Guide PERMANENT SPLIT CAPACITOR MOTORS - 5.6" DIAMETER (continued) F FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D1910 5.6 3/4 460 1075 1 PSC 2.2 OPEN VENTILATED REVERSIBLE BALL 1/2 X 6-3/8 D910 5.6 3/4 460 1075 1 PSC 2.2 OPEN VENTILATED REVERSIBLE BALL 1/2 X 6-3/8 D1914 5.6 3/4 460 1050 1 PSC 1.7 TOTALLY ENCLOSED REVERSIBLE BALL 1/2 X 6 D914 5.6 3/4 - 1/2 460 1075 2 PSC 2.
PAGE 8
MOTOR SCOPE Selection Guide SERIES WOUND DC MOTORS - 3" DIAMETER FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS DC142 3 1/8 12 3150 1 SERIES WOUND 28.
PAGE 9
MOTOR SCOPE Selection Guide SHADED POLE MOTORS - 3.3" DIAMETER (continued) H FASCO DIAMETER MODEL (IN.) HP VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D136 3.3 1/30 115 1500 1 SP 1.3 OPEN VENTILATED DBL SHFT SLV 2 X 5/16 X 2 D1120 3.3 1/20 115 1500 1 SP 2.1 OPEN VENTILATED CW SLV 5/16 X 2-1/2 D227 3.3 1/20 115 1500 1 SP 1.7 TOTALLY ENCLOSED CCW BALL 5/16 X 2-1/4 D132 3.3 1/20 115 1500 1 SP 1.
PAGE 10
MOTOR SCOPE Selection Guide SHADED POLE MOTORS - 3.3" DIAMETER (continued) FASCO DIAMETER MODEL (IN.) HP AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D473 3.3 D469 3.3 SP 2 TOTALLY ENCLOSED CCW SLV 5/16 X 2-5/8 SP 1.3 TOTALLY ENCLOSED CCW SLV D1107 5/16 X 2-1/8 1 SP 3.2 OPEN VENTILATED CCW BALL 5/16 X 1-3/8 1550 1 SP 0.5 TOTALLY ENCLOSED CCW SLV 5/16 X 2-1/2 460 1550 1 SP 0.5 TOTALLY ENCLOSED CW SLV 5/16 X 2-1/2 115 1550 2 SP 2.5 - 2.
PAGE 11
MOTOR SCOPE Selection Guide SHADED POLE MOTORS - 4.4" DIAMETER FASCO DIAMETER MODEL (IN.) HP AMPS ENCLOSURE ROTATION BEARINGS SHAFT DIMENSIONS D333 4.4 D485 4.4 SP 1.4 OPEN VENTILATED DBL SHFT SLV 7-1/4 X 3/8 X 7-1/4 SP 2.2 - 1.1 OPEN VENTILATED CCW SLV D484 3/8 X 3-1/8 1 SP 2.2 - 1.1 OPEN VENTILATED CW SLV 3/8 X 3-1/8 1500 1 SP 1.7 OPEN VENTILATED CW SLV 5/16 X 2-1/4 1550 4 SP 2.1 - 1.4 - 1.2 - 1.
PAGE 12
MOTOR SCOPE Selection Guide SHADED POLE MOTORS - 5" AND 5.1" DIAMETER (continued) FASCO DIAMETER MODEL (IN.
PAGE 13
MOTOR SCOPE Selection Guide UNIT BEARING MOTORS FASCO MODEL D550 D551 D552 D553 D554 D555 D556 D557 D582 D583 D558 D559 D560 D561 D562 D563 D564 D565 D566 D567 D568 D569 D570 D571 D572 D573 D574 D575 D576 D577 D578 D579 D580 D581 L WATTS VOLTS RPM SPEEDS TYPE AMPS ENCLOSURE ROTATION 2 2 2 2 4 4 4 4 5 5 6 6 6 6 9 9 9 9 16 16 16 16 25 25 25 25 35 35 35 35 50 50 50 50 115 115 230 230 115 115 230 230 115 115 115 115 230 230 115 115 230 230 115 115 230 230 115 115 230 230 115 115 230 230 115 115 230 2
PAGE 14
D.C. PRODUCTS 3.0" DIAMETER D.C. MOTORS • 12 VDC • 3.0" Diameter SERIES WOUND D.C. MOTORS HP Stack Amps Spds. Rot. Model "A" Dim. Shaft Dim. Application Torque (oz. in.
PAGE 15
C-FRAME K-Line C-FRAME • K-LINE • SHADED POLE TWO MAIN THRU-BOLTS WITH TORX HEADS ▼ Stack In./mm ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ • 115 and 230 VAC models • Thermally protected • UL recognized • CSA certified • Packed 6 per carton, except K628, K629, K670, K672, and K673 packed 1 per carton. ▼ ▼ MODELS K101, K102, K114, K611, K612 .625/15.8 1.25/31.7 .562/14.2 .75/19.0 .75/19.0 .562/14.2 1.00/25.4 .75/19.0 .5/12.7 .75/19.0 .562/14.2 .625/15.8 1.00/25.4 1.00/25.4 .75/19.0 1.00/25.4 .562/14.2 .75/19.0 1.
PAGE 16
C-FRAME • SHADED POLE K-Line Fan Blades used with K-Line Motors Fig. A K100 Fig. D K109, K110 Fig. G K113 Fig. J K130 Fig. B K101 Fig. C K102, K114 Fig. E K111 Fig. F K112 Fig. H K115 Fig. I K120 Fig. K K161 K-FAN4032 K-FAN4031 “D” Shaped hub .2178" Dia. Bore 4-5/8" Fan Dia. Round bore hub .1811" Dia. Bore 4-5/8" Fan Dia. K-FAN6009 K-FAN6010 “D” Shaped hub .2178" Dia. Bore C.W. Rotation 6-5/8" Fan Dia. Round bore hub .1811" Dia. Bore C.W. Rotation 4" Fan Dia.
PAGE 17
UNIT BEARING MOTORS • UL recognized • CSA certified SHADED POLE • TOTALLY ENCLOSED • AIR-OVER Amp Watt Thermal Material Volts RPM Model Fig. Rot. Rating Ratings Protection Fig. A D550, D551, D552, D553, D554, D555, D556, D557, D558, D559 D560, D561, D562, D563, D564, D565, D582, D583 2 2 2 2 4 4 4 4 5 5 6 6 6 6 9 9 9 9 16 16 16 16 25 25 25 25 35 35 35 35 50 50 50 50 Fig. B D566, D567, D568 D569, Fig. C D570, D571, D572, D573, D574, D575, D576, D577 Fig.
PAGE 18
3.3" DIAMETER General Purpose Motors • UL recognized • CSA certified • 115 and 230 VAC models • Thermally protected SKELETON MOTORS • AIR-OVER • 3.25" DIA. Fig. A D200, D201 H.P. Volts Amps RPM Rot. 1/85 1/85 115 115 .6 .6 3000 3000 C.W. C.C.W. Model D200 D201 Fig. "A" Dim. Shaft Dim. A A 2 21/4 23/8 x 1/4 x 3/4 1 /4 x 13/8 SHADED POLE • OPEN VENTILATION • AIR-OVER Fig. B D202, D203, D206, D210, D216, D229, D230 Fig. C D211, D213 Fig. D D402. D403 Model Fig. "A" Shaft Dim. Dim. H.
PAGE 19
3.3" DIAMETER General Purpose Motors • 115, 230 and 115/230 VAC models • Thermally protected • UL recognized • CSA certified • Self-cooled for mechanical duty SHADED POLE • OPEN VENTILATION • SELF-COOLED H.P. Fig. A D208, D608 1/50 1/30 1/30 Volts Amps 230 115 115 .6 1.1 1.1 Model Fig. Dia. "A" Dim. RPM Rot. 3000 3000 3000 C.W. D608 D.S. D209 C.W. D208 A B A 3.33 3.33 3.33 33/4 35/8 35/8 Shaft Dim. /4 x 15/16 3 / x 1/4 x 31/4 1 /4 x 3 1 1 4 Fig.
PAGE 20
3.3" DIAMETER General Purpose Motors • 115, 230, 240 and 208-240 VAC models • Thermally protected • UL recognized • CSA certified SHADED POLE • OPEN VENTILATION • AIR-OVER Fig. A D128, D129, D136 H.P. Volts Amps RPM 1/160 208-240 .5 600 1/125-1/200 115 .4-.3 1500 1/90 240 .34 1500 1/70 115 .7 1500 1/70 115 .7 1500 1/50-1/65-1/80 115 1.1-.8-.6 1300 1/50 115 .9 1500 1/50 115 .9 1500 1/40 115 1.1 1500 1/40 115 1.0 1500 1/40-1/50-1/80 115 1.3-.9-.6 1500 1/40 230 .60 1500 1/40 115 .9 1550 1/37 115 .
PAGE 21
3.3" DIAMETER General Purpose Motors SHADED POLE AND PSC • OPEN VENTILATION • AIR-OVER H.P. Fig. A D540, D541 1/25 1/20 1/20 1/20 1/20 1/20 1/15 1/15-1/25 1/10 ▼ Fig. B D1162 Volts Amps RPM Rot. 230 115 115 230 230 460 115 115 230 1500 1500 1500 1500 1500 1500 1600 1500 1500 D.S. C.W. C.C.W. C.W. C.C.W. C.W. C.W. C.C.W. Rev. .69 1.8 1.8 .9 .9 .4 2.1 2.9-1.9 .95 Model Fig. "A" Shaft Dim. Dim.
PAGE 22
3.3" DIAMETER Refrigeration Fan Motors UNIT BEARING REPLACEMENT • Mounting bracket designed to match the original motor (four 8-36 drilled and tapped holes). • Mounting hardware included with all models. Fig. A D429, D437 • All motor lengths were designed to match replacing unit. • All motors have 22" leads with 4/64" thick insulation • Rotation is as viewing motor shaft end. • Three studs all opposite shaft end are 8-32 on a standard 2.84"bolt circle, 120° apart.
PAGE 23
3.3" DIAMETER Refrigeration Fan Motors BOHN* EVAPORATOR COIL AND REFRIGERATOR FAN MOTORS Fig. A D1125 H.P. Volts Amps 1/20 1/15 1/15 115 230 208-230 2.1 1.1 .4 RPM 1550 1550 1550 Model Fig. "A" Dim. Shaft Dim. D1124*# D1126*# D1125▲† B B A 3 31/2 33/4 /16 x 3 /16 x 3 5 /16 x 25/8 5 5 KEEPRITE C.C.W. ROT. • EVAPORATOR COIL AND REFRIGERATOR FAN MOTORS SHADED POLE Fig. B D1124, D1126 W NE W E N 1/20 1/20 1/20 1/20 115 208-230 115 230 2.1 1.0 .8 .
PAGE 24
3.3" DIAMETER Self Cooled Motors • 115, 230 and 115/230 VAC Motors • Thermally Protected • Self-cooled for mechanical duty • UL recognized • CSA certified SHADED POLE • TOTALLY ENCLOSED SELF COOLED • 3.91" DIA. Fig. A D192, D226, D234, D235, D334 H.P. Volts Amps 1/25 1/50-1/80-1/140 1/25 1/25 1/20 1/20 1/15 1/15 1/12 Fig. B D134, D135, D227 115 115 115 230 115 115 230 115 115 1.6 .9-.6-.5 1.6 .9 1.6 1.7 1.4 2.2 2.2 RPM Rot. Model Fig. "A" Dim. 1500 1500 1500 1500 1500 1500 1500 1500 1500 C.
PAGE 25
3.3" DIAMETER Window A/C Motors • 115 VAC motors • Thermally protected • UL recognized • CSA certified • Interchangeable with most window air-conditioner motors SHADED POLE • OPEN VENTILATION • AIR-OVER H.P. Fig. A D366, D367 Amps RPM 1/18-1/30 2.4/1.2 1330 1/16-1/25-1/35 1.9-1.6-1.4 1550 1/14-1/25 2.5-1.5 1550 1/12-1/20-1/30 3.0-2.1-1.7 1550 1/10-1/30 2.5-2.3 1550 Rot. C.C.W. D.S. D.S. D.S. C.C.W. Model Fig. "A" Dim. D1111 ■ D1113 ■ D366 D367 D325 ■ H G A A B 31/2 31/8 31/4 35/8 31/2 Shaft Dim.
PAGE 26
3.3" DIAMETER Flue Exhaust Draft Booster Blower Motors • UL Recognized • Thermally protected • CSA Certified SHADED POLE MOTORS TOTALLY ENCLOSED • AIR-OVER • 3.81" DIA. Fig. A D222 H.P. Volts 1/25 115 Amps 1.6 RPM Rot. Model 1500 D.S. D222 Fig. "A" Dim. Shaft Dim. A 27/8 21/4 x 5/16 x 21/4 SHADED POLE MOTORS OPEN AND TOTALLY ENCLOSED • AIR-OVER MECHANICALLY REVERSIBLE Fig. B D520 H.P. Volts Amps RPM 1/20-1/50 115 2.0-1.0 1/100 -.6 1500 Rot. Model Fig. Const. C.W.
PAGE 27
3.3" DIAMETER Flue Exhaust and Draft Booster Blower Motors • UL Recognized • Thermally protected • CSA Certified SHADED POLE • OPEN VENTILATION H.P. Volts Amps RPM Rot. Model Fig. "A" Dim. 1550 C.W. 1550 C.C.W. 3200 C.C.W. 3000 C.C.W. 3200 C.C.W. 3000 C.C.W. 3200 C.W. 3000 C.C.W. D418 • D415 • D1191• D1192 D1196 D1198 D1194• D1193 A A B C E H F G 51/2 51/2 53/4 51/3 31/4 31/8 51/2 27/8 3000 D1188• D 65/8 Fig.
PAGE 28
3.3" DIAMETER Flue Exhaust and Draft Booster Blower Motors • Thermally protected • Supplied with bushings • UL Recognized • CSA Certified • Supplied with Centrifugal Switch SHADED POLE • OPEN VENTILATION H.P. Fig. A D408 Volts Amps RPM 1/150 115 .5 1/40 208/230 .55 1/30 115/230 1.3/.7 1/30 115 1.5 1/15 115/230 2.0/1.0 1/15 208/230 1.0 1/15 115/230 2.0/1.0 1/15 460 .6 1/15 460 .6 1/10 208-230 1.5 Fig. B D454 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 Rot. Model Fig. C.W. C.C.W. C.C.W. C.
PAGE 29
BLOWERS Specific Purpose Blowers • Some Blowers are also listed in OEM and Blower sections of catalog • For Gas or Oil Furnaces and Heaters • Thermally protected • Sleeve bearing and ball bearing models Fig. A A129 Fig. B A159, A161 • Blower flanges available shown in accessory section of catalog BLOWERS FOR HIGH EFFICIENCY FURNACES Model Fig. Volts Amps Motor Type No. of Speeds Reference No. A129 A 115 1.95 S.P. 1 Amana 7021-9064, 7021-9259 A158^ L 115 .7 P.S.C.
PAGE 30
BLOWERS Specific Purpose Blowers BLOWERS FOR HIGH EFFICIENCY FURNACES Fig. A A064 Amps Motor No. of Type Speeds Model Fig. Volts Reference No. A064 A 115 .7 S.P. 1 Heil Quaker 610672, 7021-5043, 7021-7102 A134• B 115 1.5 S.P. 1 InterCity Products 7021-9335/ 7021-8735, 7021-9499, 7021-8736,7021-7700 A145^• C 115 .7 P.S.C. 1 InterCity Products 7062-4061 A141• D 115 1 S.P. 1 InterCity Products 7021-8741, 7021-8742, 7021-9188, 7021-9498 A148 E 208-230 .5 S.P.
PAGE 31
BLOWERS Specific Purpose Blowers BLOWERS FOR HIGH EFFICIENCY FURNACES Model Fig. Volts Amps Motor Type No. of Speeds Reference No. Nordyne 7021-9132, Fig. A A131 A131 A 115 1.1 S.P. 1 7021-10171, 7021-10159, A132 B 115 1.1 S.P. 1 Nordyne 7021-7975 7021-9661 Rheem Ruud 74-70-2149603-01; 74-70-21504-03-04; Fig. B A132 A079 C 115 1.1 S.P. 7021-5615; Goodman 1 B1859000, 7021-6804, JA1M106, JA1M137; Trane B1W24, WG94X167 Rheem 70-21496-01, 7021-5239, JA1M102, A090 D 115 1.1 S.
PAGE 32
BLOWERS Specific Purpose Blowers BLOWERS FOR HIGH EFFICIENCY FURNACES Fig. A A146 Model Fig. Volts Amps Motor Type A146 A 115 1-.35 S.P. 2 A069 B 208-240 .5 S.P. 1 A075■ • C 230 .4 S.P. No. of Speeds 1 Fig. B A069 Reference No. Trane 7021-7986, 7002-2531, 7021-8925 Trane 38040252, 82252, 7021-6682 Franklin 82005; Trane 38050005, 7021-6681 Trane 7062-3956, 7021-4004, A130^ D 115 .7 P.S.C. 1 7062-5247, 7062-3616; Nordyne 7062-4159, 7062-4639 A150 E 208-230 .5 S.P.
PAGE 33
4.4" DIAMETER General Purpose Motors • 115 and 230 VAC models • Thermally protected • UL recognized • CSA certified SHADED POLE • OPEN VENTILATION • AIR-OVER ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ ▼ Fig. A D116, D118, D170, D310, D374, D377, D674 Fig. B D174 H.P. Volts Amps 1/20-1/30-1/60 1/20 1/15 1/15-1/30 1/15 1/12 1/12 1/11-1/25-1/70 1/10 1/10-1/15 1/10 1/8-1/20 115 115 115 115 115 115 115 115 115 230 115 115 2.0-1.7- 1.4 1.7 2.4 2.4-1.4 2.1 3.1 4.0 2.9-1.5-1.0 3.5 2.0-1.3 3.1 4.0-2.5 RPM Rot. 1500 C.C.W.
PAGE 34
4.4" DIAMETER Fan Coil Air-Conditioning and Heating Unit Motors • 115, 230 and 115/230 VAC models • Thermally protected • Interchangeable with most fan coil airconditioning or heating units and unit heaters SHADED POLE • OPEN VENTILATION • AIR-OVER Fig. A D117 H.P. Volts 1/25 115 1/20-1/30-1/40-1/60 115 1/15-1/25-1/30-1/40 115 Fig. B D236, D336, D337, D338, D339, D635 W NE Fig. C D329 Amps RPM Rot. Model Fig. "A" Shaft Dim. Dim. 1.4 1550 D.S. D333 2.1-1.4-1.2-1.1 1550 D.S. D335 2.4-1.4-1.1-.
PAGE 35
4.4" DIAMETER Refrigeration Fan Motors • 4.4" Diameter • 115/208-230 VAC • Thermally protected • UL recognized • CSA certified • Mechanically reversible Fig. A D480, D481, D482, D483, D484, D485 • 3/8" shaft diameter with adapter to convert to 1/2" diameter • Weld nuts on a 3.5" B.C. for stud mount • Extended hubs with rubber rings for base mount • Interchangeable with G.E.
PAGE 36
5.0" DIAMETER Refrigeration Fan Motors • 115/208-230 VAC • Thermally protected • UL recognized • CSA certified • Mechanically reversible Fig. A D490, D491, D492, D493, D494, D495 • 3/8" shaft diameter with adapter to convert to 1/2" diameter • Weld nuts on a 3.5" B.C. for stud mount • Extended hubs with rubber rings for base mount • Interchangeable with G.E. 21 and 29 Frame motors and other Emerson, Universal and Franklin refrigeration motors SHADED POLE • OPEN VENTILATION • SELF-COOLED H.P.
PAGE 37
5.0" DIAMETER Fan Coil Air-Conditioning and Heating Unit Motors • 115, 230, 277 and 208-230 VAC models • Thermally protected • Interchangeable with most fan coil air-conditioning or heating units • Models shown with bases have 3-1/2" shaft height SHADED POLE • OPEN AND TOTALLY ENCLOSED VENTILATION • AIR-OVER Fig. A D224, D247, D249, D250, D252, D253, D254, D255, D256, D655, D1025, D389 H.P.
PAGE 38
5.0" DIAMETER Direct Drive Blower Motors • Thermally protected • UL recognized • 115, 230, 208-230, 277 VAC models SHADED POLE • OPEN VENTILATION • AIR-OVER H.P. Fig. A D316 W NE Fig. B D160, D656 Fig. C D154, D156, D158, D164, D166, D178, D658, D1046 Volts Amps RPM 1/10 115 5.0 1050 1/10-1/20 115 3.9/1.7 1050 1/10-1/20 115 3.9-1.7 1050 1/10-1/12-1/15 115 3.4-2.8-2.4 1050 1/8 230 2.1 1050 1/8 115 5.1 1050 1/8-1/11 115 4.5-3.4 1050 1/8-1/15 230 2.3-1.5 1050 1/8-1/11 115 4.5-.3.
PAGE 39
5.0" DIAMETER Ventilator and Unit Heater Motors • Thermally protected • 115 VAC models • UL recognized ROOF TOP VENTILATORS • SHADED POLE OPEN AND TOTALLY CLOSED VENTILATION • AIR-OVER Fig. A D242, D340 H.P. Volts 1/40 1/30-1/40 1/25 1/20 1/15 1/15 1/15-1/25 1/12-1/20-1/25 1/10 1/10 1/10 1/8 1/6 1/6 Fig. B D143 Fig. C D140, D144 Amps RPM Rot. Model Fig. Const. 115 1.1 1050 C.W. D340* A 115 1.5-1.0 1050 C.C.W. D143‡ B 115 1.4 1125 C.W. D1038 I 115 1.95 1050 C.W. D1036° H 115 2.3 1050 C.W.
PAGE 40
5.6" DIAMETER Condenser Fan Motors SHAFT UP OR HORIZONTAL • • • • Fig. A D735, D737, D739 208-230 VAC Electrically reversible Thermally protected UL recognized • Closed end shield • CSA certified shaft end • All angle mount bearings • 60° ambient • Includes shaft water temperature rating slinger PSC • OPEN VENTILATION • AIR-OVER Fig. B D747, D748, D937 Fig. C D745, D749, D929, D935, D939 Fig. D D930, D951 H.P. Volts Amps RPM Load Factor Model Fig. "A" Dim.
PAGE 41
5.6" DIAMETER Condenser Fan Motors 825 RPM MOTORS • • • • • Models for shaft-up, shaft-down and horizontal applications • 208-230 and 115 VAC models Electrically reversible Thermally protected UL recognized CSA certified • All angle mount bearings. Use rainshield when necessary • 60° ambient temperature rating PSC • OPEN VENTILATION AND TOTALLY ENCLOSED • AIR-OVER Fig. A D790, D791, D792, D795, D934, D936 Fig. B D793 Fig. C D796, D797 Fig "A" Dim.
PAGE 42
5.6" DIAMETER Condenser Fan Motors TOTALLY ENCLOSED MOTORS • Ideal for any angle mounting • 208-230 and 230 VAC models • Electrically reversible Fig. A D903, D904, D905, D1700, D1701, D1702 • Thermally protected • UL recognized • CSA certified • All angle mount bearings • Ball bearing and sleeve bearing models • 60° ambient temperature rating PSC • TOTALLY ENCLOSED • AIR-OVER Fig. B D906, D907, D908, D909, D917, D919, D922, D925, D931, D932, D933 Fig. C D7907, D7908, D7909 H.P.
PAGE 43
5.6" DIAMETER Multi-Purpose Motors MULTI-PURPOSE CONDENSER FAN & DIRECT DRIVE BLOWER MOTORS CONDENSER FAN MOTORS • TOTALLY ENCLOSED AIR-OVER H.P. 1/3 1/4 1/5 1/6 1/3 1/4 1/5 1/6 1/3 1/4 1/5 1/6 Volts 208-230 208-230 208-230 Amps CAP @ 208V Line CAP @ 230V Line 1.9 1.5 1.2 1.0 2.6 2.5 2.0 1.8 3.0 2.2 1.6 1.3 10 MFD 10 MFD 10 MFD 10 MFD 7.5 MFD 7.5 MFD 7.5 MFD 7.5 MFD 12.5 MFD 12.5 MFD 12.5 MFD 12.5 MFD 7.5 MFD 7.5 MFD 7.5 MFD 7.5 MFD 5 MFD 5 MFD 5 MFD 5 MFD 10 MFD 10 MFD 10 MFD 10 MFD RPM Rot.
PAGE 44
5.6" DIAMETER Condenser Fan Motors 230/460 VAC MOTORS WITH INTERNAL COOLING FAN • Ideal for shaft-up applications • 230/460 VAC • Electrically reversible Fig. A S2846 • Ball bearings • Thermally protected • All angle mount bearings • Comes with unmounted conduit box • 60° ambient temperature rating PSC • OPEN VENTILATION • AIR-OVER H.P. 1/2 3/4 Fig. B S2848 Amps RPM Load Factor Model Fig. "A" Dim. 230/460 3.9/2.0 230/460 4.7/2.4 1075 1075 1.2 1.
PAGE 45
5.6" DIAMETER Condenser Fan Motors 460 VAC MOTORS • Thermally protected • All angle mount bearings Fig. A D802 • Electrically reversible • Ball bearings • 60° ambient temperature rating PSC • TOTALLY ENCLOSED • AIR-OVER H.P. Volts Amps RPM Load Factor Model Fig. "A" Dim. 1/2 3/4 460 460 1.0 1.7 1050 1050 1.0 1.1 D802★• D1914★• A B 51/2 6 ★ 10M 370V capacitor Fig. B D1914 • 230/460 and 460 VAC models • Electrically reversible • Thermally protected Fig. C D916, D918 Shaft Dim.
PAGE 46
5.6" DIAMETER Condenser Fan Motors 200-575 VAC FAN SHELTERED MOTORS • 60° ambient temperature rating • Thermally protected • Ideal for shaft up applications • Ball bearings • Electrically reversible PSC • OPEN VENTILATION • AIR OVER Fig. A D2710, D2713, D2714 H.P. W NE W E N W E N W NE W NE W NE W E N Fig. B D2711 .4 .6 .6 .6 .8 .8 1/2 Volts Amps RPM 200-230/460 200-230/460 200-230/460 575 200-230/460 200-230/460 200-230/460 3.2/1.6 4.0/2.0 4.0/2.0 1.5 4.6/2.3 4.6/2.3 4.6/2.
PAGE 47
5.6" DIAMETER Direct Drive Blower Motors OPEN CONSTRUCTION • Ideal for blowers and fans used in furnaces and air-conditioners • 115 VAC Fig. A D701, D712, D721, D727, D728, D902, D928 • Electrically reversible • Thermally protected • UL recognized • CSA certified • All angle mount bearings • Sleeve bearings PSC • OPEN VENTILATION • AIR-OVER Volts Amps RPM 1/6-1/8-1/10 1/4-1/5-1/6 1/3-1/4-1/5 115 115 115 2.7-2.1-1.7 4.8-3.3-2.6 5.9-4.6-3.8 1075 1075 1075 1.2 1.2 1.2 Rev. D928 Rev. D721 Rev.
PAGE 48
5.6" DIAMETER Direct Drive Blower and Unit Heater Motors • Ideal for blowers and fans used in furnaces and air-conditioners • 277 VAC (Not suitable for 230 VAC applications) Fig. A D970, D971, D972, D973, D975 • • • • • Single and double shaft • Single shaft electrically reversible • Thermally protected UL recognized CSA certified All angle mount Sleeve bearings PSC • OPEN VENTILATION • AIR-OVER Fig. B D976, D979 RPM Load Rot. Model Fig "A" Factor Dim H.P.
PAGE 49
5.6" DIAMETER Window A/C, Condenser Fan and Direct Drive Blower Motors • 208-230,230 and 115 VAC models • Thermally protected • UL recognized • CSA certified • All angle mount sleeve bearings Fig. A D786, D789 • Single shaft motors are electrically reversible • These motors should not be used for replacements where original motor is rated below 1500 RPM. Some high slip airconditioning motors are rated often at 1300-1400 RPM. SINGLE SHAFT PSC • OPEN VENTILATION • AIR-OVER Fig.
PAGE 50
5.6" DIAMETER Window Air Conditioner Motors • All angle mount sleeve bearings • Hubless end shields for flush mounting • Extended tie rods • 208-230, 230 and 115 VAC models • Thermally protected • UL recognized • CSA certified Fig. A D750, D751, D752, D754, D755, D756, D757, D758, D760 D761, D763, D769 • Ideal versatility using Kit 200 “X” brackets to accommodate various cradle base lengths • Ideal for lug mounting using lug Kit 55L or 55S PSC • OPEN VENTILATION • AIR-OVER H.P.
PAGE 51
5.6" DIAMETER 50HZ Export Motors • 230 VAC models • All angle mount bearings. Use rainshield when necessary • • • • Sleeve bearings Thermally protected UL recognized CSA certified PSC • 50 Hz • OPEN AND TOTALLY ENCLOSED VENTILATION AIR-OVER Fig. A D3771, D3772, D3758, D3760 H.P. Volts 1/6-1/8-1/10 230 Fig. B D3775, D3774, D3752, D3755 Amps Rot. RPM Model Fig. .8-.6-.5 D.S. 1350 D3775 230 1.5-1.1-.8 D.S. 1350 D3774+ B 1/3-1/4-1/5 230 2.1-1.5-1.1 D.S. 1350 D3771 1/2-1/3-1/4 230 3.0-1.9-1.
PAGE 52
5.6" DIAMETER Pedestal Fan Motors and Gearmotors • 115 and 115/230 VAC models • D998 designed for maximum protection against dirt and moisture 5.6" DIA. • PEDESTAL FAN MOTORS • 1100 RPM PERMANENT SPLIT CAPACITOR Fig. A D824, D901, D997, D999 Fig. B D900 • Fan motors include pull-chain switches, except D998 and D900 H.P. Volts Amps Rot. Model 1/4-1/8 1/3-1/8 1/2-1/4 1/2-1/4 1/2-1/4 115 115 115 115 115 3.2-2.4 4.0-3.5 7.1`-4 7.1-4 7.1-4.0 Rev. Rev. Rev. Rev. Rev.
PAGE 53
NEMA 48 AND 56 Frame Motors NEMA 48 FRAME SPLIT PHASE BELTED FAN & BLOWER MOTORS RESILIENT BASE • OPEN DRIP PROOF • CONTINUOUS DUTY 115/230 VOLT • BALL BEARING • REVERSIBLE Fig. A D6002, D6004, D6006 H.P. RPM 1/4 1/3 1/2 1725 1725 1725 FLA Service Thermal Factor Protection 5.2/2.6 6.2/3.1 8.6/4.3 1.35 1.35 1.25 Auto Auto Auto Fig. Model A A A D6002 D6004 D6006 Shaft Dim. Ring to Ring Dim. /2 x 11/2 /2 x 11/2 1 /2 x 11/2 7.435 7.935 8.435 1 1 Fig.
PAGE 54
NEMA 56 Frame Motors NEMA 56 FRAME • DRIP PROOF • THREE PHASE RESILIENT BASE • 208-230/460 VOLT • BALL BEARING CONTINUOUS DUTY • REVERSIBLE • UL & CSA CERTIFIED Fig. A D6622, D6624, D6626 H.P. RPM Fig. B D6628, D6630, D6631 D6633 1/3 1/2 3/4 1 11/2 2 3 Service Thermal Factor Protection FLA 1725 1.6/.8 1725 2.0/1.0 1725 2.8/1.4 1725 3.4/1.7 1725 4.6/2.3 1725 6.2/3.1 1725 8.0/4.0 1.35 1.25 1.25 1.15 1.15 1.15 1.10 ■ * 56H Mounting Auto Auto Auto Auto Auto Auto Auto Fig. Model Shaft Dim.
PAGE 55
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim. Shaft Dia. and Length Reference No. AIR AMERICA CORP. 1/8 115 3.3 1050 1 D1028 G SP 1/20-1/30-1/40 265 .4 .3 .2 1100 3 D1062# D PSC 1/20-1/30-1/40 208-230 .4 .3 .2 1100 3 D1056# † A 1/20-1/30-1/40 265 .5 -.3 .2 1100 3 D1058 208-230 4-2.8 1075 2 — 115 1.95 3250 — 115 .7 — 115 1.6 Band 5.1 C.W. 3-1/2 1/2 x 2-1/2 A0510B2008 Lug 5.1 C.W.
PAGE 56
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. 5.6 Rev. "A" Dim Shaft Dia. and Length. Reference No. ARKLA PSC Base Band 1/3 115 6.1 825 1 D795 G 5-3/4 1/2 x 6-1/2 — 115 1.4 3000 1 A155 L SP 115 2.1 1550 1 D1124✔ H SP Band 1/15 230 1.1 1550 1 D1126✔ H SP Band 3.3 C.W. 1/15 208-230 .4 1550 1 D1125+ K PSC Stud 3.3 C.C.W. – C.C.W. Gas Heat Pump K55HXSFN8042 ARMSTRONG — 3.3 C.C.W. — — 7021-10046 3.3 C.W.
PAGE 57
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim 4 Shaft Dia. and Length Reference No. BUCK STOVE 1/50-1/80-1/140 115 .88 .60-.45 1550 3 D1138 H SP Band 3.9 C.W. 1/50-1/80-1/125 115 .88 1550 .61-.46 3 D1139 I SP Stud 3.3 C.W. 1/10 115 1 D1066 5/16 x 2-1/2 R22CCW270ZD 7163-6045 2-13/16 2-1/2 x 5/16 x 1-1/8 R22CW206MD ▼ BUTLER VENTILATOR 3.6 1050 A SP Band 5.0 C.W. 3-7/8 1/2 x 2-3/4 846PY4V, 2414 3.3 C.C.W.
PAGE 58
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length. Reference No. CARRIER 1/30 208-230 .65 3000 1 D463• I SP Stud 3.3 C.W. 3-7/8 5/16 x 2-1/2 HC24HE230 1/16 208-230 .57 3450 1 D1182■ J PSC Stud 3.3 C.C.W. 4-1/2 5/16 x 3-1/3 7162-3367 HC30GB23OB K33HXCCP-915 HC3OGB230 1/15 230/460 1.2/0.6 3000 1 D459• H SP Stud 3.3 C.W. 1625 1 D844# D PSC Lug 5.6 C.W. 208-230 2.2-2.
PAGE 59
OEM DIRECT Replacement Models CARRIER/BLOWER WHEELS Diameter Width Rot. Fig. Bore 1-6051 Model 3-27/32 1-13/64 C.C.W. A 1/4 Flue Exhaust & Draft Booster LA21RB327 Replaces 1-6052 4-1/4 2-15/16 LA21RA425 C.W. A 1/4 Flue Exhaust & Draft Booster LA21ZA038 1-1/4 C.W. A 1/4 Flue Exhaust & Draft Booster 2-1/2 C.C.W. B 1/4 Gas Furnace Draft Inducer 4 1-1/2 C.C.W. A 5/16 P441-1146, LA11AA004 5-3/4 1-1/2 C.C.W.
PAGE 60
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length. – Reference No. COLEMAN 88CFM 115 1/8-1/11 115 1.3 3200 1 A088 A S.P. – 3.3. C.W. 4.5-3.4 1050 2 D178 B SP Base 5.0 C.W. 1/150 115 .48 3000 1 D408 C — 115 .9 3000 1 A128 I 1/4 208-230 1.5 1625 1 D783 D SP Threaded Holes 3.3 C.W.
PAGE 61
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length. Reference No. EMERSON 1/5-1/6-1/8 208-230 1.6-1.5 1400 1.3 3 D1033 B PSC Base 5 D.S. 3-3/4 2-3/4 x 1/2 x 3-1/2 Quiet Kool EVANS/ARMSTRONG/LSI/HOME 1 – 3/4 230 6.2-5.6 1625 2 D825* C PSC 1/85 115 0.67 2950 1 K629 L SP — 115 1.4 3000 1 A156 M SP .58 (stack) 115 .6 1110 1 K102 F SP .625 (stack) 115 .7 2750 1 K100 E SP Base 5.6 Rev.
PAGE 62
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length. Reference No. FEDDERS (continued on next page) 1/80 115 1/20 2-1/8 1/4 x 1 Threaded w/Driver Fedders, Oasis Whirlpool Port. Dehumidifiers C.W. 2-7/8 5/16 X 2-1/3 Roof Top AC 4.4 D.S. 3-3/8 3 x 3/8 x 3 RMR, RY1302, 5206-00025-001 Y24CW50, 7190-0163 Base 5.0 D.S. 3-1/4 2-5/8 x 1/2 x 2-5/8 Window AC Motors, S196-10-6 and S196-101-6 SP Stud, Base 5.0 D.S.
PAGE 63
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length 3-3/4 x 1/2 x 3-1/4 Reference No. FEDDERS (continued) 1/3 208-230 2.1-1.9 1.5 1240 3 D888 C PSC Stud Base 5.6 D.S. 5-1/4 159 CFM 230 .5 1550 1 A159• B SP – 3.3 C.C.W. – – 161 CFM 230 .6 1600 1 A161• B SP – 3.3 C.C.W. – – S206-00014-004 FASCO 7124-0589 AK4K84BX 11-7096 Brinkley 8353920103 Fedders FRIEDRICH 1/3-1/4-1/5-1/6-1/7 230 2.1-1.
PAGE 64
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft DIa. and Length Reference No. GENERAL ELECTRIC 208-230 1.1-.7 1625 2 D896# A PSC Stud 5.6 C.C.W. L.E. 3-3/4 2-7/8 x 1/2 x 2-1/4 KCP39DGD779S, WJ94X0518 1/5-1/6-1/8-1/10 230 1.5-1.1 1.0-.8 1075 4 D897# ■ B PSC Lug 5.6 C.W. 3-3/4 2-3/8 x 1/2 x 2-1/2 KCP39EG5480S, 5KCP39DGK014T 5KCP39EG5480S WP94X1, WJ94X162 1/5-1/8-1/10 265 1.3-.9 1075 .7 3 D898 # ■ B PSC Lug 5.6 C.W.
PAGE 65
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length Reference No. GOODMAN — 115 1.4 3400 1 A140 I SP — 3.3 C.W. — — 7021-9087, 7021-9000 — 115 7.3 3000 1 A157 J SP — — C.C.W. — — 7002-2307 — 208-230 .5 3000 1 A162 K SP — 3.3 C.C.W. — — 7021-8656 — 115 1.1 3000 1 A079 L SP — 3.3 C.C.W. — — 7021-6804 4-1/8 1/2 x 2-3/4 7108-2425 GREENHECK FAN 1/20-1/30-1/60 115 2.0-1.7 1550 1.
PAGE 66
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length Reference No. HONEYWELL AIR CLEANER 1/12-1/20-1/25 115 3.1-2.1 1050 1.5 3 D1054 E SP Band 5.0 C .W. 2-5/8 1/2 x 2-1/2 190386A 5KSP29DK1906S 3-3/4 1/2 x 4-7/8 5KCP39EGC244T 5KSP39FG4771S HUSSMANN 1/6 208-230 1.2 1625 1 D807•# A PSC Stud, Base 5.6 C.C.W. 1/2 208-230 2.7 1725 1 D890 F PSC Stud 5.6 C.C.W. 4.5 1/2 x 3-1/2 259983 K55HXCTP-9963 120 .
PAGE 67
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length Reference No. INTERTHERM-ADDISON 3/4-1/2 230 1 230 4.3-3.5 1075 6.6 1625 2 D872 ∞ H PSC Band 5.6 D.S. 5-1/2 2 x 1/2 x 6-1/4 1 D871•▼ I PSC Base 5.6 D.S. 5-1/4 6-3/4 x 1/2 x 8 5KCP39MGN341T 5KCP35PG502S, 7796B MODBW48A17038A 8101-338 ITT REZNOR 1/10 208/230 .8 3200 1 D404•* A PSC Stud 3.3 Rev.
PAGE 68
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length 4-1/8 5/16 x 2-3/4 Reference No. KEEPRITE W NE W NE 1/20 115 .8 1550 1 D1243* G PSC Stud 3.3 C.C.W. 1/20 230 .4 1550 1 D1245* G PSC Stud 3.3 C.C.W. 4 5/16 x 2-3/4 501899, 7164-1243 7164-1854, R370 501909, 7164-1313, 7164-1853, R371 1/20 115 2.3 1550 1 D1120 J SP Stud 3.3 C.W. 3-1/2 5/16 x 2-1/2 7163-8722, 1043336 1/20 208-230 2.
PAGE 69
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Rot. "A" Dim 5.0 C.W. 3" Dia. Shaft Dia. and Length Reference No. LEAR SIEGLER 1/8 115 5.1 1070 1 D1046 A SP Base 1/2 x 2-1/4 305313-000-165 7151-0073, 7151-2826 LENNOX 1/30 115 1.5 3000 1 D1198 J SP Lug 3.3 C.C.W. 1/4 230 1.9 1075 1 D814 # B PSC Base 5.6 C.W. 3-3/4 1/2 x 3 7121-8774 P-8-2702, 5KCP39GGA124S 1/3-1/4-1/6-1/8 115 6.1-3.2 1075 2.2-1.6 4 D812 C PSC Base 5.6 C.W.
PAGE 70
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length Reference No. LOMANCO W NE 1/3 115 1.1 1550 1 D1008 K SP Lug 4.4 C.W. 3 1/2 x 1-7/8 OLM6151, 322P151 1/2 x 2-3/4 35035B001, 322P859, DE3L038 — 35035B001, 322P859, DE3L038 MAGIC CHEF 1/4 208-230 2.2 1075 1 D1091 I PSC Band 5 C.C.W. 4-1/2 — 230 .5 3000 1 A081•^† J SP — 3.3 C.C.W. — – C.C.W. – .2178 x 1.15 Many Freezer Case Applications 5.
PAGE 71
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length C.C.W. 8-7/8 3/4 x 2-3/16 Reference No. MUELLER 1/12/120 in/lbs 115/230 1.85 1.0 36 1 V44-36• J SP Lug – Mueller V01535A144(30152) GritonV01734AC44 Babson V00827AA44 NESBITT/BLOWER WHEELS Model 2-6139 H.P. Diameter Width Rot. Fig. Bore Replaces 6-5/16 6-1/4 C.C.W. A 3/4 HVAC Wall and Ceiling units Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot.
PAGE 72
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length C.W. 5-3/4 1/2 x 3-1/2 2-5/8 3/8 x 2 7151-3081,7151-3565 3/8 x 2-1/8 7151-2139 ROOF TOP VENT Z8 Reference No. PATTON 1/4-1/12 115 3.2-2.4 1100 2 D824#• B PSC Pedestal 5.6 7126-0485, 7126-0922 PENN VENTILATOR 1/15 1/20 115 115 2.3 2.0 1050 1045 1 1 D342 † D1036 A A SP SP Stud Band Stud 5.0 5.0 C.W. C.W. 2-3/8 PMI/VALCUN HART — 115 0.
PAGE 73
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. "A" Dim Rot. Shaft Dia. and Length Reference No. RHEEM/RUUD (continued) 1/3-1/4 208-230 2.3/1.6 825 2 D815 ■▲ J PSC Bracket 5.6 C.W. 4-1/2 1/2 x 2-1/3 51-23103-07 1/5 208-230 1.3 1075 1 D2840^ F PSC Stud 5.6 C.W. 3-3/4 1/2 x 4-1/8 51-21853-82 1/6 208-230 1.2 825 1 D2842^ E PSC Stud 5.6 C.W. 4 1/2 x 4-1/4 51-20760-11 1/8 208-230 1.1 825 1 D832^ A PSC Stud 5.6 Rev.
PAGE 74
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. "A" Dim Rot. Shaft Dia. and Length Reference No. SEARS/WHIRLPOOL 1/30-1/65 115 1.0-.7 1500 2 D137 A SP Stud 3.3 D.S. 2-7/8 2 x 5/16 x 2 Rangehood 3-1/2 3 -1/8 x 5/16 x 2-3/8 JA2S094, JA2S110, JA2S121N, A456301, A495601, A495603, 5500 BTU Window A/C; G000519549; G519549 1/18-1/30 115 2.4-1.2 1330 1130 2 D1111 J SP Lug 3.3 C.C.W.LE 1/15-1/20-1/30 115 1.1-.8 1500 .
PAGE 75
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length C.C.W. – – Reference No. TAPPAN 73CFM 115-230 .8/.5 3000 1 A073 • A SP – 3.3 82932, 8251560133 TECUMSEH 1/15 460 .6 1550 1 D475 D SP Stud 3.9 C.C.W. 4-1/2 5/16 x 2-1/2 Tecumseh 810G037A47 5KSP11FG1197CS 3-3/4 2-3/4 x 1/2 x 3-1/2 M11730, 322P373 M12100, 322P454 TEMPMASTER/OTASCO 1/5-1/6-1/8 208-230 1.6-1.5 1400 1.3 3 D1033 B PSC Base 5.0 D.S.
PAGE 76
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length Reference No. TRANE W NE 69CFM 208-240 .5 3000 – A069 A SP Stud 3.3 C.C.W. – – 38040252, 82252 75CFM 230 .4 3000 1 A075• B SP Stud 3.3 C.C.W. – – 38050005 1/8 230 1.1 1550 1 D1050‡• C PSC Band 5.0 C.W. 3-1/4 1/2 x 3 WW94X236SP WW94X936PSC 1/8 208-230 .8 1650 1 D895# D PSC Stud 5.6 C.W.
PAGE 77
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length 5.6 C.W. 4-3/4 1/2 x 3 Reference No. TYLER 1/4 230 1.9 1625 1 D870•# H PSC Base 5KCP39EGC053T Unit No. 760 UNIFLOW – 115 1.32 13 1 VS62-13• F PSC – – – – 5/8 x 2-1/4 Flaker Ice Machine Gearmotor, V00682AU62 WHITE CONSOLIDATED INDUSTRIES 1/18-1/30 115 2.41.2 1330 1130 2 D1111 G SP Lug 3.3 C.C.W.
PAGE 78
OEM DIRECT Replacement Models H.P. Volts Amps RPM Spd. Model Fig. Type Mtg. Dia. Rot. "A" Dim Shaft Dia. and Length C.W. — — 7021-5510, 02-568 — 100,000 BTU Furnace 7021-6999, 7021-7042 Leads must be modified Reference No. WILLIAMSON 80CFM 118CFM 115 115 1.1 1.8 3000 3000 1 1 A080 A118 G H S.P. — S.P. — — — C.W. — YORK W NE 1/40 460 .37 3200 1 D1191 I SP Stud 3.3 C.C.W. 5-3/4 1/4 x 2-1/2 7121-7255 1/15 460 .6 3000 1 D1171• A SP Stud 3.3 C.C.W.
PAGE 79
CONTACTORS Contactor Replacement Coils Coil VAC Model Ref. 24 120 240 277 480 H2040A H2040B H2040C H2040D H2040E A 24 120 240 277 480 H3040A H3040B H3040C H3040D H3040E B 24 120 240 277 480 H5060A H5060B H5060C H5060D H5060E C 24 120 240 277 480 H7590A H7590B H7590C H7590D H7590E D 24 120 240 277 480 H120A H120B H120C H120D H120E E Fig. No. 1 Fig. 3 Fig. 1 2 3 Fig.
PAGE 80
CONTACTORS DEFINITE PURPOSE CONTACTORS (continued on next page) Poles F/L Inductive Amps Locked Rotor Amps 240/480/600 Resistive Amps Coil AC Volts Coil VA Inrush 60 HZ Coil VA Sealed 60 HZ Coil VA Inrush 50 HZ Coil VA Sealed 50 HZ HP 120 Vac 1 PH HP 240 Vac 1 PH 24 30 150/125/100 40 1 120 240/200/160 50 24 120 208/240 28 31 5 6 1 2 150/125/100 40 2 120 28 31 5 6 2 3 240/200/160 50 24 120 208/240 1 H140A H140B H140C 2 H230A 30 33 6.
PAGE 81
CONTACTORS 3.75 2.99 1.76 2.37 3.25 Fig. 1 Three Pole Fig.
PAGE 82
CONTACTORS 3.75 3.61 2.75 1.75 • 40 Amp - Lugs and quick connect terminals 3.23 Fig. 3 Three Pole • 50/60 Amp - Lugs and quick connect terminals 5.00 4.10 • 30 Amp - Screws and quick connect terminals 3.75 2.9 2.5 2.7 • 75/90 Amp - Lugs and quick connect terminals • 120 Amp - Lugs only Fig. 4 Three Pole Model 4.62 5.18 Figure Use Replm’nt. Coil Ref. Page 72 Use Opt. Aux. Switch Model Page 72 Use Repl.
PAGE 83
CENTRIFUGAL BLOWERS 15 to 65 Free Air Output 3.26 .20 DIA. 3.91 4.30 1.88 DIA. 4.64 3.81 2.44 HOLES 120 APART 4.16 50745-D500 2.82 DIA. A167 2.30 1.187 2.810 D600 D500 4.64 6.30 2.38 2.81 DIA. 5.24 4.48 D230 2.45 5.81 5.16 4.40 .281 DIA. 50747-D500, 50747-D600, 50747-D230 2.77 B30 6.30 2.38 2.38 .281 DIA. 1.187 .281 DIA. 2.810 5.81 6.30 2.810 1.18 3.55 D500 D700 4.50 4.50 5.81 50748-D500, 50748-D700 5.16 50747-D401 6.30 2.38 6.50 .136 DIA. 1.18 2.810 4.
PAGE 84
CENTRIFUGAL BLOWERS 69-75 Free Air Output 3.50 2.00 6.30 B23617 6.30 2.12 DIA. 2.76 2.00 1.78 5.81 5.81 4.50 B23618 4.50 9.33 B23617, B23618 A069 3.00 3.25 DIA. 6.30 5.81 2.12 DIA. 6.30 .642 .218 DIA 4 PLCS 1.78 5.81 4.50 4.50 4.23 DIA. 10-24 UNC-2A THREAD 5.57 A073 A071 5.87 5.86 2.00 6.30 2.00 5.73 5.81 4.50 2.87 5.30 3.38 .281 DIA. .100 8.22 A075 B75 5.52 1.72 7.12 6.30 7.63 2.71 A082 CFM at Static Pressure Shown Static Pressure (inches of water) 0.1 0.2 0.
PAGE 85
CENTRIFUGAL BLOWERS 80 to 125 Free Air Output 4.03 2.375 6.30 6.30 2.810 2.12 DIA. 5.81 5.80 4.50 4.50 ø .114/.111 (3) HOLES 5º SPACED 120º APART 6.25 A081 Ø .136 Ø 2.12 2.22 8.67 REF. A083 5.30 4.74 7.06 4.12 8.06 .282 DIA. 5.63 1.47 2.87 8.41 .282 DIA. 3.97 A166 50757-D500 6.20 .281 DIA. 2.38 6.30 8.79 4.61 5.81 4.53 2.810 3.66 3.65 Uses models 1-6039 and 1-6038 wheels 50746-D500 4.31 A125 CFM at Static Pressure Shown Static Pressure (inches of water) 0.1 0.2 0.3 0.
PAGE 86
CENTRIFUGAL BLOWERS 135 to 265 Free Air Output 4.12 6.73 .281 DIA. 8.06 1.50 2.94 8.42 7.20 6.66 6.06 9.03 Uses model 1-6042 wheel 50752-D500, 50752-D230 .281 DIA. Uses model 1-6053 wheel A159 4.12 8.06 4.12 8.06 1.47 .282 DIA. 1.47 8.41 8.40 6.66 6.40 10.35 50755-D500, 50755-D230 Uses model 1-6054 wheel 4.06 6.90 Uses model 1-6053 wheel A161 3.60 3.54 8.92 3.54 3.60 1.18 6.90 4.20 8.95 3.33 .31 DIA. 5 PLCS 4.74 4.64 4.20 Uses model 1-6066 wheel B47120 3.66 .
PAGE 87
CENTRIFUGAL BLOWERS 320 to 1000 Free Air Output 12.40 11.15 4.12 3.52 10.31 8.06 .281 DIA. 1.47 11.12 8.40 5.00 .281 DIA. 50756-D500, 50756-D230 6.00 A455 10.53 (B45267) 9.28 (B45230) 8.09 8.83 9.47 10.31 11.12 4.39 9.89 5.00 4.37 .280 DIA. B45267, B45230 50769-D500, 50769-D230 8.81 11.01 .281 DIA. 6.00 13.06 11.73 7.28 13.10 12.02 14.86 5.00 14.87 6.426 .281 DIA. B68042 7.18 7.030 CFM at Static Pressure Shown Static Pressure (inches of water) 0.1 0.2 No.
PAGE 88
CENTRIFUGAL BLOWERS 64 to 1200 Free Air Output 7.12 2.38 3.19 2.38 5.52 1.75 5.52 1.75 3.19 1.75 7.63 3.38 3.02 3.05 4.64 3.89 .312 DIA. 5PLCS 1.25 A064 3.05 3.02 3.89 4.64 3.38 1.25 2.25 5.57 A079 2.38 1.75 3.02 .38 5.67 5.53 OILING LABEL 1.66 1.77 1.73 3.38 3.28 SEE DETAIL "A" 7.17 7.07 6.34 6.24 28º .3125 3.44 3.32 3.05 7.68 7.58 7.63 2.98 2.93 .300 2.76 2.68 3.89 4.64 .312 DIA. 5 PLCS .332 4.71 2.72 2.25 V 3.19 7.63 .315 Ø 4.71 REF. 1.66 LABEL .75.
PAGE 89
® TRANSFLO BLOWERS Direct Drive – 80 to 215 CFM Free Air Output CFM at Static Pressure Shown Static Pressure (inches of water) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Nameplate CFM Volts Freq. 57 90 22 40 100 125 196 60 83 70 — — 5 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — 80 115 105 153 215 115 115 115 115 115 60 60 60 50/60 60 No. of RPM@ Amps@ Speeds Free Air Free Air 1 1 1 1 1 4.19 1.82 3.50 1.51 2.64 B22505 .20 DIA. X .
PAGE 90
FAN BLADES 2 and 3 Blade, Interchangeable Hub Condenser (Pressure) Type FEATURES • 18 to 24 inch diameters • High quality, heavy duty aluminum blades • Zinc and dichromate plated steel spiders • For use with interchangeable hex hubs on page 89 • Blades tested at 1000 RPM PART NUMBER BREAKDOWN NO. OF BLADES 3 FAN BLADE TYPE C BLADE DIAMETER 18 ROTATION R BLADE PITCH 33 HUB BORE SIZE 4 (Fixed hubs only) 234- C-Condenser F-Free Air S-Slinger Ring 5Etc...
PAGE 91
FAN BLADES 4 Blade, Interchangeable Hub Condenser (Pressure) Type FOUR BLADE FEATURES • 14 to 26 inch diameters • High quality, heavy duty aluminum blades • Zinc and dichromate plated steel spiders • For use with interchangeable hubs • Blades tested at 1000 RPM. TYPICAL APPLICATIONS • Air-conditioning condensers, heat pumps • Power roof ventilators, industrial equipment • Unit heaters, heat exchangers STATIC PRESSURE FAN PART NO.
PAGE 92
FAN BLADES 3 and 4 Blade, Fixed Hub Condenser (Pressure) Type FEATURES THREE BLADE • 14 to 24 inch diameters • High quality, heavy duty aluminum blades • Factory balanced, 1/2" bore, shaved and staked hub-attached on intake side STATIC PRESSURE FAN PART NO. ROTA- DIA TION (IN) PITCH (DEG) 0" .30" CFM BHP CFM BHP STD PACK 3CR1833-4 C.W. 18 33 2830 .14 1620 .21 4 3CR2033-4 C.W. 20 33 4070 .26 2830 .
PAGE 93
FAN BLADES 5 Blade, Fixed Hub PART NO. FIVE BLADE FIXED HUB ONE PIECE TYPE 0" STATIC PRESSURE PITCH BORE MAX (DEG) (IN.) RPM CFM BHP ROT. DIA. (IN.) 5FR727-1 5FL727-1 5FR727-2 5FL727-2 5FR824-1 5FL824-1 5FR824-2 5FL824-2 5FR832-1 5FL832-1 5FR832-2 5FL832-2 C.W. C.C.W. C.W. C.C.W. C.W. C.C.W. C.W. C.C.W. C.W. C.C.W. C.W. C.C.W.
PAGE 94
FAN BLADE ACCESSORIES PILLOW BLOCK BEARINGS PART NO. BORE SIZE MOUNTING CENTER /8" /4" KIT501 5 3" KIT502 KIT503 3 1" 3" 3" 1" 31/2" KIT504 (Heavy Duty) Packaged two per kit SHAFT/THRUST COLLAR Includes Hollow Head (Allen) Set Screws OUTER DIA. 11/4" 11/2" PART NO. KIT523 KIT524 INSIDE DIA. 3 /4" 1" Packaged two per kit OIL TYPE BEARING WITH INSULATOR PART NO.
PAGE 95
ACCESSORIES ACCESSORY DISPLAY BAND MOUNTING KITS Lug kits P/N Motor Dia. Bolt Circle Range 5.5" Large 81/8 - 121/8 67/8 - 81/8 5.5" Small 11 3.3" Large 4 /16 - 97/8 5.0" Large 67/16 - 1111/16 3 small lugs for Kit 55S 4 grommets to fit lugs on Kits 49, 50, 34, 55L, 55S NO55L NO55S KIT34 KIT50 KIT49 KIT150 DISPLAY SIGN P/N 8634-6002 Lug Size P/N DISPLAY KIT150 FAS MOUNT BRACKET KITS P/N FM50 Motor Dia. 5.0" Bolt Circle 9" and 10.18" P/N FM55 Motor Dia. 5.5" Bolt Circle 9" and 10.
PAGE 96
ACCESSORIES BLOWER ACCESSORIES RESILIENT MOTOR BASES B Inlet Screens 4004 A = 3.125 B = 4.50 C = 4.188 C B 4000 A = 4.72 B = 6.125 C = 5.
PAGE 97
ACCESSORIES END SHIELD KITS For 3.3" Diameter Motors For Shaft End of 48 Frame Motors SHLD6301 Ventilated no ext. oil retainers 1/2" Sleeve Bearing KIT216 Special End Plate for 3.3" Diameter Motors For Base Mounting Use with Kit 180 Mounting Rings (see page 94) Packaged one per kit SHLD6312 Non-Ventilated no ext. oil retainers 5/8" Sleeve Bearing 4.38" BCD SHLD6303 Ventilated with double oiling 1/2" Sleeve Bearing KIT225 Triangular bracket with grommets for 3.
PAGE 98
ACCESSORIES MOUNTING ADAPTER KITS & PARTS Mounting Kits Adapter Plates 2-1/2" 4-5/16" KIT200 Holes for 4.4" and 5.6" Dia. Motors One kit will adapt both ends of motor for base mounting KIT207 Provides rectangular mounting stud pattern on 5.0" or 5.6" diameter Fasco Motors to match Fedders stud motors. Similar to Emerson and RMR rectangular mounting stud patterns Packaged one per kit KIT199 Motor length adapter kit. Provides means to base mount Fasco 5" dia.
PAGE 99
ACCESSORIES MOUNTING ADAPTER KITS & PARTS Rheem Mounting Cables Coleman “Lord” Mount MNT1518 P/N KIT325 KIT350 KIT378 Length 31/4 31/2 37/8 Motor H.P. 1 /6 1 /4 1 /3 Special mounting cables for Rheem. Four per pkg. Stud: 1/4 x 8-32 Hole: 1/4 x 8-32 Bushing: 1/2 x 1/2 Shipped individually KIT208 Studs: 3/8" x 8-32 x 3/8" Bushing: 1/2" x 1/2" 4 per kit H33 Special Mounting Kit for 3.3" Diameter to Replace Motors in Nu-tone Units.
PAGE 100
ACCESSORIES CAPACITORS MISCELLANEOUS KITS Capacitor Mounting Kit KIT6001 Rubber Boot and Bracket RUBBERBOOT P/N RATING STYLE 6100-6028* 6100-9020* 6100-9006* 2 mfd 3 mfd 4 mfd 370V 370V 370V Oval Oval Oval 6100-6080†* 6100-9085* 6100-9010* 5 mfd 5 mfd 6 mfd 370V 440V 370V Oval Oval Oval 6100-6082†* 7.5 mfd 6100-9088* 7.5 mfd 6100-6083†* 10 mfd 370V 440V 370V Oval Oval Oval 6100-6002* 10 mfd 6100-6030* 12.5 mfd 6100-9037 15 mfd 440V 370V 370V Oval Oval Oval 6100-6031 17.
PAGE 101
ACCESSORIES MISCELLANEOUS KITS (continued) Neoprene Gasket 1 gasket GASKET0167 Includes 4 grommets Water Slinger SLINGR6002 /2" I.D. 2" O.D. Shipped individually 1 Shaft Bushings Qty. 4 Rain Shields KIT240 KIT170 /4" ID x 5/16" OD 1 KIT242 /8" ID x 1/2" OD 3 KIT244 /16" ID x /8" OD 5 3 For 1/2" Shaft Dia. Motors RAIN6000 For 5/8" Shaft Dia.