Brochure

ManualsBrandsFasco ManualsHVAC SuppliesConduit Box Adaptor Kit

Thermally protected • UL recognized • CSA or ULc certified

NOTE: Rotation is deter

mined by looking at shaft end. Shaft length is measur

ed fr

om motor face.

Kits and Fan Blade Parts

105

Accessories

HEX HUB FEATURES

• Sizes to fit most applications

• Simple screw design

• Zinc plated steel

• Pre-tapped holes with mounting

and set screws started

Packaged 12 per carton.

SPLIT TAPERED BUSHINGS “H” SERIES

PART NO. BORE

STB1 1/2

STB2 5/8

STB3 3/4

STB4 7/8

STB5 1

STB6 1 1/8

STB7 1 3/16

STB8 1 3/8

Packaged one per kit.

NTERCHANGEABLE HEX HUBS

PART NO. BORE NO. SET SCREWS

H5 5/16 1

H6 3/8 1

H8 1/2 2

H10 5/8 2

BUSHING FEATURES

• Two bolt design

• Two 1/4-20 x 3/4" cap screws provided

• Malleable iron construction

• For 1/2"-13/8" bore ranges

UG KITS

FAN BLADE ACCESSORIES

BAND MOUNTING KITS

NO50L, NO33L

KIT315, KIT317

NO50L 4.4" & 5.0" Large 6 1/2 - 11 8/16

NO33L 3.3" Large 4 1/2 - 10

KIT315 5.0" Lar

10 9/50

KIT317 5.6" Large 10 9/50

PART NO. MOTOR DIA. LUG SIZE

OLT CIRCLE

ANGE

NO55L 5.5" Large 8 1/8 - 12 1/8

NO55S 5.5" Small 6 7/8 - 8 1/8

IT34

.3"

arge

11/16 - 9 7/8

KIT50 5.0" Large 6 7/16 - 11 11/16

KIT49 3 small lugs for Kit 55S

KIT150 4 grommets to fit lugs on Kits 34, 49, 50, 55L, 55S

NO55L, NO55S,

KIT34, KIT50

KIT150 KIT49

FM50

Motor diameter 5.0"

Bolt circle 9" and 10.18"

FM55

Motor diameter 5.5"

Bolt cir

cle 9" and 10.18"

These kits are designed for direct drive blower motors using the flexible bracket

mounting arrangement.

Grommets and eyelets are included.

FM55 replaces this type bracket

FAS MOUNT BRACKET KITS

Summary of content (8 pages)

PAGE 1
Accessories Kits and Fan Blade Parts FAN BLADE ACCESSORIES BAND MOUNTING KITS HEX HUB FEATURES LUG KITS • Sizes to fit most applications • Simple screw design • Zinc plated steel • Pre-tapped holes with mounting and set screws started INTERCHANGEABLE HEX HUBS PART NO. MOTOR DIA. LUG SIZE BOLT CIRCLE RANGE NO55L 5.5" Large 8 1/8 - 12 1/8 NO55S 5.5" Small 6 7/8 - 8 1/8 KIT34 3.3" Large 4 11/16 - 9 7/8 KIT50 5.0" Large 6 7/16 - 11 11/16 PART NO. BORE NO.
PAGE 2
Accessories CONDUIT BOXES KIT142 Conduit Boxes, Bracket Kits & Blower Parts BL0WER ACCESSORIES INLET SCREENS Black box for 3.3” diameter motors. C 4004 A = 3.125 B = 4.50 C = 4.188 Packaged one per kit. B A 4000 A = 4.72 B = 6.125 C = 5.75 KIT144 Gray, tie-rod mountable box for 4.4", 5.0" and 5.6" diameter motors. Packaged one per kit.
PAGE 3
Accessories Resilient Motor Bases RESILIENT MOUNTING BASE INDEX FASCO MODEL NO. RECOMM. BASE FASCO MODEL NO. RECOMM. BASE FASCO MODEL NO. RECOMM.
PAGE 4
Accessories End Shield Kits FOR 3.3" DIAMETER MOTORS FOR SHAFT END OF 48 FRAME MOTORS (CONTINUED) KIT216 SHLD6303 Special end plate for 3.3" diameter motors for base mounting. Use with Kit 180 mounting rings. Packaged one per kit. Ventilated with double oiling hub 1/2" Sleeve Bearing. KIT225 4.38" BCD Triangular bracket with grommets for 3.3" diameter motors. Packaged one per kit. MOUNTING CUP SHLD6311 Ventilated with flat face 5/8" Sleeve Bearing.
PAGE 5
Accessories Mounting Adapter Kits & Parts MOUNTING KITS ADAPTER PLATES KIT200 Holes for 4.4" and 5.6" diameter motors. 2-1/2" One kit will adapt both ends of motor for base mounting. 4-5/16" KIT199 KIT207 Motor length adapter kit. Provides means to base mount Fasco 5"" diameter motors. Two kits needed to adapt both ends of motor for base mounting. Provides rectangular mounting stud pattern on 5.0" or 5.6" diameter Fasco motors to match Fedders stud motors.
PAGE 6
Accessories Mounting Adapters & Rings MOUNTING ADAPTER KITS & PARTS RUBBER MOUNTING RINGS RHEEM MOUNTING CABLES FOR 5.6", 5.0" AND 4.4" DIAMETER MOTORS PART NO. LENGTH MOTOR H.P. KIT325 KIT350 KIT378 3-1/4 3-1/2 3-1/8 1/6 1/4 1/3 KIT184 Henrite 2.50 Packaged two per kit. Special mounting cables for Rheem. Four per pkg. KIT183 Henrite 2.25 O.D. Packaged two per kit. H33 Special mounting kit for 3.3" diameter to replace motors in Nu-tone units. Includes four nuts and two hex hub brackets.
PAGE 7
Accessories Capacitors & Miscellaneous Kits CAPACITORS MISCELLANEOUS KITS CAPACITOR MOUNTING KIT KIT6001 Rubber boot and bracket. RUBBERBOOT Rubber boot sold separately. PART NO. RATING STYLE 6100-6028* 2 mfd 370V Oval 6100-9020* 3 mfd 370V Oval 6100-9006* 4 mfd 370V Oval 6100-6119* 5 mfd 370V Oval 6100-9085* 5 mfd 440V Oval KIT220 6100-9010* 6 mfd 370V Oval 8" long 8-32 NC for Fasco 5.6" diameter motors. 6100-6120* 7.5 mfd 370V Oval 6100-9088* 7.
PAGE 8
Accessories Miscellaneous Kits (cont.) NEOPRENE GASKET WATER SLINGER GASKET0167 SLINGR6002 Includes one gasket and four grommets. 1/2" I.D. x 2" O.D. Shipped individually. • 3.3" diameter motors • 2.84" Bolt Circle diameter SHAFT BUSHINGS QTY. 4 KIT240 1/4" ID x 5/16" OD KIT242 RAIN SHIELDS 3/8" ID x 1/2" OD KIT244 KIT170 5/16" ID x 3/8" OD For 1/2" shaft diameter motors. KIT246 1/2" ID x 5/8" OD RAIN6000 For 5/8" shaft diameter motors. KIT465 Anderol 465 synthetic lubricating oil (3 oz.