FM-100 MediCam Quick Start Guide See more information on www.fasmedo.
1. Package contents 1. 2. 3. 4. 5. 2 ○ 1 ○ 6 ○ 5 ○ 4 ○ 3 ○ 7 ○ 8 ○ 9 ○ 10 ○ 11 ○ Quick start guide View Area Calibrator x 1 Silicone pad x 1 MediCam x 1 Plastic steel sheet with leather cover x 1 6. 18650 battery x 2, power adaptor x 1 7. Battery charger with power cable x 1 8. Bluetooth pedal x 1 9. Type C cable x 1 10.Spare leather cover x 1 11. Belt x 1 2. Appearance introduction Front Back 10 ○ 6 ○ 4 ○ 3 ○ 5 ○ 7 ○ 8 ○ 1 ○ 9 ○ 2 ○ 1. Lens 2. LED 3. Hinge 4. Power button 5.
4. Insert the battery Use a coin to remove the cover from bottom edge. Insert one battery carefully noting the “+” and “–“markings, with the “+” side placed on the bottom. Replace the cover and snap back in place. 2 5. Attach /Detach the optional front holder Attach: Insert the bottom arm into the bottom groove then snap up-wards into place. Detach: Pull the front holder out from upper Groove and remove. 5.1 How to attach the belt (Optional) A. Remove the leather cover from the front holder. B.
6. Turn on your MediCam A. ON/OFF: Press and hold the Power Button Power Button for 3 seconds to turn ON/OFF your MediCam. Once on, the LED should show a solid green light. B. LED: Click on the Power Button for different levels of LED. (Low -> Medium -> High -> Off -> repeats) We recommend to have LED on when recording. 7. Connect your MediCam with App (Go to Step 8 if you have iPad paired with MediCam already.) 7.
Make sure WiFi and Bluetooth are enabled on your smart device. A. New MediCam is found. Tap the new MediCam on the list to continue. B. Confirm to “Join MediCam’s network”. C. Now you see a preview on your smart device for the area being filmed. 8. How to take videos Before start recording, place the “View Area Calibrator” near your comfortable working distance (usually around 1-2 feet), then adjust the lens to aim at the area being filmed. (Hinge adjustable angle is about 0~78 degrees.
the start of recording. A low-pitched tone will sound to signal the stop of recording.) Record button 8.2 By tapping the screen on the app When in the preview mode, videos and photos can be taken by tapping the red record button. 8.3 By using the Pedal A. Before using the Pedal, have it charged at least 3 hours. B. Press the POWER switch to turn on the Pedal for set up. C. Pair the Pedal by connecting to Bluetooth. Select “Bluetooth Music Pedal” to make the connection. D.
10. Manage MediCam Videos/ Photos 10.1 Save media files from MediCam to PC A. Connect your MediCam to PC by USB cable. B. Turn on the MediCam to access the media files stored in internal memory card. C. View the videos (VIDEOS folder) and photos (PHOTOS folder) on PC, select to view/save the files you need. 10.2 Save media files from app to your smart device A. On the Start screen, click the Gear icon , tap “Manage Photo and Video” to save files needed to your smart device.
B. Or in the Preview mode, tap the folder icon to save files needed to your smart device. 11. Live Streaming Before start using Live Streaming, you must possess a cellular-4G-enabled smart device and your smart device must be connected to a cellular 4G network. (cellular plan NOT included) 11.1 Host Live Event (Default view time is 1,000hours, each viewer would accumulate consumed time) A. When viewing video streaming on app, tap “Live” to switch to live broadcasting. B.
11.2 Watch Live Events A. All invited parties must download MediCam App before watching live events. B. Tap “ Live Events” to proceed, and tap the + icon to add live event, then enter the sharing code you have received. C. The Live event will be added to the list. The green light indicates the event is live now. D. Tap on the live event will lead audiences to the live streaming view. There is no playback control. Tap the “X” icon to exit.
12. Button/LED Functions MODE Front LED Behavior Boot up: Fast flash Power ON Idle: Battery>20 % , Battery<20 % Battery>20 % : Slow flash Recording Battery<20 % : Fast flash WiFi Battery>20 % : Slow flash Disconnected Battery<20 % : Slow flash Battery <100 % : Slow flash Charging Battery full: Power OFF Light Off: Memory Full Slow flash 13.
chargers designed or approved specifically for Medicam Avoid exposing Medicam to fire and other direct heat sources, including hair dryers, microwave ovens and other appliances. It is recommended that you do not disassemble the unit for any reason. Do not force objects into your device connection, connection or button. If the connector is not easily inserted, it may not match. Do not use spray cleaners on your MediCam, as this could damage the system. 14.
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
16.
All rights reserved© 2018 Faspro Systems Co., Ltd.