How to Guide

FAST 2K
Fence Post Backfill
Technical Data Sheet
March 2018
Worldwide Use
3
Royal Adhesives & Sealants Canada Ltd
266 Humberline Drive | Toronto, Ontario, Canada M9W 5X1
Tel. [phone] | [phone] | Fax: [phone]
www.chemque.com | www.royaladhesives.com
MATERIAL PROPERTIES (77°F/ 25°C)
Property
Value
Test Method
Colour: Part A
Part B
Mixed
Grey
Dark brown
Light Grey
Visual
Mix time 30 seconds
Rise time 1.5 – 2.0 minutes ASTM D2237
Set time 3 – 5 minutes
Full strength 30 minutes
Weather resistance (cold and hot) Excellent
Water absorption Waterproof (<0.02%)
Environmental Hazardous None. (Product becomes inert after full cure)
Clean Up
Using a soft cloth and mineral spirits , carefully remove any Fast 2K smudges from surfaces of the post that are visible
(above ground) as well from tools before Fast 2K dries. After Fast 2K dries, it can only be removed by cutting it with a
handsaw or a utility knife for example. Be careful as this may damage the post surface.
Customer Service
Royal Adhesives & Sealants Canada Ltd.
T: [phone]
266 Humberline Dr.,
F: [phone]
Toronto, Ontario M9W 5X1
[e-mail]
Canada
www.Fast2K.com / www.chemque.com
G:\Product Information\Restricted Access\Administration Files\Fast 2K\TDS\Current\Fast 2K-rev13-1803-Worldwide use.doc
The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any
suggested method of application and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information
to determine to your own satisfaction whether they are suitable for your intended uses and applications. This application-specific analysis must at least include testing to
determine suitability from a technical as well as health, safety, and environmental standpoint. Such testing has not necessarily been done at Royal Adhesives & Sealants
Canada Ltd. All technical assistance and information provided with respect to Royal Adhesives & Sealants Canada Ltd.’s products is subject to Royal Adhesives & Sealants
Canada Ltd.’s Terms and Conditions, including the limited warranty therein. Royal Adhesives & Sealants Canada Ltd.’s Terms and Conditions appear on the reverse side of
Royal Adhesives & Sealants Canada Ltd.’s credit applications and invoices and are available upon your request. Except as expressly provided in the Terms and Conditions,
Royal Adhesives & Sealants Canada Ltd. excludes all express and implied warranties, representations, conditions and objections, whether statutory or otherwise, concerning
the quality of the products of Royal Adhesives & Sealants Canada Ltd. or their fitness for any particular purpose. It is expressly understood and agreed that the customer
assumes and hereby expressly releases Royal Adhesives & Sealants Canada Ltd. from all liability, in tort, contract, or otherwise, incurred in connection with the use of our
products, technical assistance and information. Any statement or recommendation not contained herein is unauthorized and shall not bind Royal Adhesives & Sealants Canada
Ltd. Nothing herein shall be construed as a recommendation to use any product in conflict with patents covering any material
or its use. No license is implied or in fact
granted under the claims of any patent.