Use and Care Guide

The conditions of your use and application of our products, technical assistance and information (whether verbal, written or by way of production evaluations), including any suggested method of application
and recommendations, are beyond our control. Therefore, it is imperative that you test our products, technical assistance and information to determine to your own satisfaction whether they are suitable for
your intended uses and applications. This application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and environmental standpoint. Such
testing has not necessarily been done at H B Fuller/Royal Adhesives & Sealants Canada Ltd. All technical assistance and information provided with respect to H B Fuller/Royal Adhesives & Sealants Canada
Ltd.’s products are subject to H B Fuller/Royal Adhesives & Sealants Canada Ltd.’s Terms and Conditions, including the limited warranty therein. H B Fuller/Royal Adhesives & Sealants Canada Ltd.’s Terms
and Conditions appear on H B Fuller/Royal Adhesives & Sealants Canada Ltd.’s credit applications and invoices and are available upon your request. Except as expressly provided in the Terms and
Conditions, H B Fuller/Royal Adhesives & Sealants Canada Ltd. excludes all express and implied warranties, representations, conditions and objections, whether statutory or otherwise, concerning the
quality of the products of H B Fuller/Royal Adhesives & Sealants Canada Ltd. or their fitness for any particular purpose. It is expressly understood and agreed that the customer assumes and hereby
expressly releases H B Fuller/Royal Adhesives & Sealants Canada Ltd. from all liability, in tort, contract, or otherwise, incurred in connection with the use of our products, technical assistance and information.
Any statement or recommendation not contained herein is unauthorized and shall not bind H B Fuller/Royal Adhesives & Sealants Canada Ltd. Nothing herein shall be construed as a recommendation to
use any product in conflict with patents covering any material or its use. No license is implied or in fact granted under the claims of any patent.
C:\Users\huffig01\Documents\U&I Role\fast 2 k\data sheets\254 Fast 2K TDS North America-2010.docx October 2020 | North America
2
(continued)
1. MIX
Release the clip that separates the two halves of the bag and
rub the bag with force from end to end along any hard surface
that has no sharp edges. Mix for 25 to 30 seconds by forcing
material inside the bag from one end to the other with each
stroke (“shoe shining” technique).
2. POUR
Empty the bag into the hole. To provide a more uniform
appearance and increase the moisture protection for the
post, pour the foam around all sides of the post at ground
level.
3. SET
Expansion will finish in approximately 3-5 minutes. In
approximately 15-30 minutes Fast 2K™ will already be quite
hard. Wait for approximately 30 minutes for the product to
completely set before installing the fence or gate.
For more detailed installation instructions, consult the Fast 2K™
Instructions on the bag or contact an H.B. Fuller representative.
TECHNICAL DATA
Physical Properties @ 77ºF (25ºC)
Colour: Part A Grey
Part B Dark Brown
Mixed Light Grey
Mix time 30 seconds
Expansion Onset 1.0 – 1.5 minutes
Set time 3 – 5 minutes
Full strength 30 minutes
Weather resistance
(cold, hot or wet) Excellent
CUSTOMER SERVICE
[e-mail] T: [phone]
Fast2K.com F: [phone]
TECHNICAL DATA SHEET
FAST 2K™
Expanding Backfill Composite