Installation Guide

IBR Installation Guide
Page 37 of 38 Doc # 770-00023.1
Jan. 23, 2015
o XON/XOFF is disabled
o Bitrate = 115200bps
o No Parity
o 8 bits
o 1 stop bit
 SSH
 Telnet
Successful connection will return the Login prompt shown below.
IBR login:
b. Log onto IBR using a valid user ID and password. IBR is shipped with the following default credentials:
user names: fbn and admin either can be used
password: fastback valid for both user names
Entering a valid user name and password will place the operator in CLI User Mode and the following
prompt will be displayed (IBR101 is shown as the default host name):
IBR101 >
c. Enter CLI Privileged mode using the following command:
IBR101 > enable
The same password that was used to log onto IBR can be used (e.g., fastback for factory default).
The Privileged Mode prompt will be displayed:
IBR101 #
All CLI resources are available in Privileged Mode. For detailed information, see the IBR Administration
and Command Line Interface Guide.
Return to Table of Contents
A 8. Contacting Fastback Technical Support
Fastback Networks Product Documentation Downloads:
https://fastbacknetworks.zendesk.com/hc/en-us/categories/200075157-Documentation
Fastback Networks Support Website:
http://www.fastbacknetworks.com/support/
For help with a specific product issue:
http://www.fastbacknetworks.com/support/faq
Contact Fastback Networks Technical Support:
email: [e-mail] telephone [phone] option 2
Return to Table of Contents