User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 32 of 85 FBN Doc #: FBN-0125_04v05
Figure 34 – One Minute History for RxPowerMin
5.3.3 Operation - Ethernet – Ethernet Status
The Ethernet Status page shows the Ethernet port parameters. By default a radio terminal’s Ethernet
interface is set to auto-negotiate the Ethernet type and rate. This page indicates the Ethernet line-rate,
whether it is active or not, and the auto-negotiation setting. The remote port parameters are also shown, and
if there is no Ethernet connected on the remote port, then these will all be red: this is a useful troubleshooting
tool, which shows that the remote terminal has no network connection.