User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 39 of 85 FBN Doc #: FBN-0125_04v05
Figure 41 - VLAN 99 used for Management only, with User Traffic both Tagged & Untagged
Figure 42 - Management VLAN only, with VLAN filtering not enabled
5.4.2.3 Case 3a: VLAN filtering enabled, with VLAN for management
In this case, VLAN’s are used, and the VLAN table must contain the same VLAN ID’s on both sides of the link.
Note that in order to enable VLAN filtering, it is first necessary to set-up the Management VLAN, which is set
on GUI page: “Administration / Management / IP”. In the figure below, VLAN ID’s 10, 11 and 12 are for User
Traffic, and VLAN ID 99 is for Management Traffic, and these VLAN ID’s are set to the same values on both