User's Manual

FAST Bin℠ User Manual
Fastenal Company FAST Bin℠ User Manual Page | 12
Revision 4.0
Repeater
1. Install the Repeater using the guidelines in Appendix A.
2. Ensure the Repeater is within 500 feet (152.4 meters) of the Controller.
3. Plug in the power cable to a standard wall power outlet.
4. Ensure that the LEDs are showing that the device is a connected state.
Controller
1. Configure the device:
a. If the site uses DHCP Ethernet, then no special network setup is required.
b. If the site requires use of Wi-Fi or a static IP address, contact Fastenal
support to configure the network settings.
c. If the site requires a cellular connection, contact Fastenal support to install a
cell modem and SIM card.
2. Plug in the power cable to a standard wall power outlet.
3. Ensure that the controller has a network connection and is plugged in via the
network connection LED indicator.
4. Ensure that no Reader or Repeater is more than 500 feet (152.4 meters) from the
Controller and that the LEDs are showing that all devices are in a connected state.