Dimensions Guide

ManualsBrandsFastenMaster ManualsTools & Hardware24-Count 6-1/4-in Structural Wood Screws

ASubsidiaryof

0



000





MostWidelyAcceptedandTrusted

ICC‐ESRe

ort

ESR‐1078

Reissued01/2017

Thisreportissubjecttorenewal01/2018.

ICC‐ES|(800)423‐6587|(562)699‐0543|www.icc‐es.org

ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not

specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a

recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as

to any finding or other matter in this report, or as to any product covered by the report.

2017ICCEvaluationService,LLC.Allrightsreserved.

“2014RecipientofPrestigiousWesternStatesSeismicPolicyCouncil

(WSSPC)AwardinExcellence”

LookforthetrustedmarksofConformity!

DIVISION:060000—WOOD,PLASTICSANDCOMPOSITES

SECTION:060523—WOOD,PLASTIC,ANDCOMPOSITEFASTENINGS

REPORTHOLDER:

OMG,INC.



153BOWLESROAD

AGAWAM,MASSACHUSETTS01001‐5008

EVALUATIONSUBJECT:



FASTENMASTER®LOKSERIESSTRUCTURALWOODSCREWS

Summary of content (10 pages)

PAGE 1
Most Widely Accepted and Trusted 0 ESR‐1078 ICC‐ES Report ICC‐ES 000| (800) 423‐6587 | (562) 699‐0543 | www.icc‐es.org Reissued 01/2017 This report is subject to renewal 01/2018. DIVISION: 06 00 00—WOOD, PLASTICS AND COMPOSITES SECTION: 06 05 23—WOOD, PLASTIC, AND COMPOSITE FASTENINGS REPORT HOLDER: OMG, INC.
PAGE 2
ICC-ES Evaluation Report ESR-1078 Reissued January 2017 Revised March 2017 This report is subject to renewal January 2018. www.icc-es.org | (800) 423-6587 | (562) 699-0543 DIVISION: 06 00 00—WOOD, PLASTICS AND COMPOSITES Section: 06 05 23—Wood, Plastic, and Composite Fastenings REPORT HOLDER: OMG, INC. 153 BOWLES ROAD AGAWAM, MASSACHUSETTS 01001-5008 (800) 518-3569 www.olyfast.com www.fastenmaster.com mguthrie@olyfast.com ADDITIONAL LISTEE: MITEK INDUSTRIES, INC.
PAGE 3
ESR-1078 | Most Widely Accepted and Trusted 3.1.5 ThruLOK Fasteners: The ThruLOK fasteners have a 5/16-inch (7.9 mm) hex-head, rolled threads and a proprietary cutting point. The fasteners are coated with mechanically applied zinc in accordance with ASTM B695, Type I, Class 55. They are supplied with the ThruLOK washer and nut. See Table 1F for fastener dimensions and a diagram. 3.2 Materials: 3.2.
PAGE 4
ESR-1078 | Most Widely Accepted and Trusted Page 3 of 8 TABLE 1A—FASTENER SPECIFICATIONS: OLYLOG AND TIMBERLOK FASTENERS ® OLYLOG / ® TIMBERLOK FASTENER DESIGNATION HEAD MARKING OVERALL 1 LENGTH (inches) LENGTH OF 2 THREAD (inches) TLOK212 or LOG212 F2.5 2 /2 1 1 /4 TLOK04 or LOG004 F4.0 4 2 TLOK06 or LOG006 F6.0 6 2 TLOK08 or LOG008 F8.0 8 2 LOG009 F9.0 9 2 TLOK10 or LOG010 F10.0 10 2 LOG012 F12.0 12 2 LOG014 F14.0 14 2 LOG016 F16.
PAGE 5
ESR-1078 | Most Widely Accepted and Trusted Page 4 of 8 TABLE 1C—FASTENER SPECIFICATIONS: LEDGERLOK AND LOGHOG FASTENERS ® LEDGERLOK / ® LOGHOG FASTENER DESIGNATION HEAD MARKING OVERALL 1 LENGTH (inches) LENGTH OF 2 THREAD (inches) LL358 F3.6 3 /8 5 2 LL005 F5.0 5 3 LHOG009 F9.0 9 3 LHOG011 F11.0 11 3 LHOG013 F13.0 13 3 LHOG015 F15.0 15 3 UNTHREADED SHANK DIAMETER (inch) 0.
PAGE 6
ESR-1078 | Most Widely Accepted and Trusted Page 5 of 8 TABLE 1E—FASTENER SPECIFICATIONS: TRUSSLOK-Z FASTENERS ® TRUSSLOK-Z FASTENER DESIGNATION HEAD MARKING OVERALL 1 LENGTH (inches) TSLZ278 F2.8 2 /8 TSLZ412 F4.5 4 /2 TSLZ006 F6.0 6 LENGTH OF 2 THREAD (inches) UNTHREADED SHANK DIAMETER (inch) 1 0.228 MINOR THREAD BENDING (ROOT) 3 YIELD DIAMETER (Fyb, psi) (inch) ALLOWABLE FASTENER STRENGTH 4 Tensile (lbf) Shear (lbf) 1,833 1,235 7 1 1 /4 0.202 218,400 For SI: 1 inch = 25.
PAGE 7
ESR-1078 | Most Widely Accepted and Trusted Page 6 of 8 1,2,3 TABLE 2—REFERENCE WITHDRAWAL DESIGN VALUES (W) [Reference withdrawal design values (W) are in pounds per inch of thread penetration into side grain of main member] FASTENER THREAD LENGTH, 4 L (inches) W (lbf./in.) FOR SPECIFIC GRAVITIES OF: 0.57 0.55 0.5 0.46 0.43 0.42 OlyLog/ TimberLOK 1.25 or 2.0 270 260 220 200 180 170 HeadLOK 2.0 290 270 230 200 180 170 LedgerLOK/ LogHog 2.0 or 3.
PAGE 8
ESR-1078 | Most Widely Accepted and Trusted Page 7 of 8 TABLE 4—REFERENCE LATERAL DESIGN VALUES (Z) FOR SINGLE SHEAR (TWO-MEMBER) WOOD-TO-WOOD 1,2 CONNECTIONS LOADED PARALLEL (Zll) OR PERPENDICULAR (Z) TO THE GRAIN FASTENER Designation Length (inches) 1 2 /2 OlyLog/ TimberLOK (5) Zll Z 240 220 220 200 200 180 280 260 260 230 240 210 6 & longer 1 2 /2 1 3 /2 290 270 270 250 250 230 8 & longer 3 5 290 270 260 250 240 230 1 1 /8 3 240 210 220 180 210 150 1 6
PAGE 9
ESR-1078 | Most Widely Accepted and Trusted Page 8 of 8 TABLE 5—CONNECTION GEOMETRY REQUIREMENTS 1 MINIMUM DISTANCE OR SPACING (inches) LedgerLOK, TimberLOK, OlyLog LogHog, TrussLOK and HeadLOK and TrussLOK-Z CONDITION 3 3 /4 3 3 /8 2 3 2 /8 2 /8 Loading perpendicular to grain 2 3 2 /8 2 /8 Any load direction 3 1 /4 3 1 /4 2 Loading parallel to grain 2 /8 7 3 /2 1 3 /2 2 3 2 /8 2 /8 1 1 1 /4 Loading toward end End distance Loading away from end Edge distance Spacing b
PAGE 10
ICC-ES Evaluation Report ESR-1078 FBC Supplement Reissued January 2017 Revised March 2017 This report is subject to renewal January 2018. www.icc-es.org | (800) 423-6587 | (562) 699-0543 A Subsidiary of the International Code Council ® DIVISION: 06 00 00—WOOD, PLASTICS AND COMPOSITES Section: 06 05 23—Wood, Plastic, and Composite Fastenings REPORT HOLDER: OMG, INC. 153 BOWLES ROAD AGAWAM, MASSACHUSETTS 01001-5008 (800) 518-3569 www.olyfast.com www.fastenmaster.com mguthrie@olyfast.