User guide

REPLACMENT INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: [phone]
www.fastestinc.com
WP006 10/6/2010
Assembly View
Instructions Supplement FE001 Mini Connector
READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO USE
WARNING: Do not operate FasTest connectors without reading and understanding
the complete installation and operating instructions. If instructions are not clear or
components are missing, contact factory before using connector.
Information on:
• Mounting of connector
• Attachment of pilot pressure and test media supply lines.
• Connector operation instructions
is described in the FE general instructions included with each connector.
FE001 Mini Connector Seal Sizes
MODEL SEAL SET SEALING RANGE
FE001 -0050 .030” - .050”
-001 .050” - .080”
-002 .080” - .130”
Buna-N o-ring seals are standard, other materials available per request.
PARTS LIST
PART NUMBER DESCRIPTION
FE001-0050 Complete External Connector
Sealing Range .030” - .050”
FE001-001 Complete External Connector
Sealing Range .050” - .080”
FE001-002 Complete External Connector
Sealing Range .080” - .130”
FES001-0050 Replacement Seal Set
Sealing Range .030” - .050”
Includes Buna-N O-Ring Seal and
Seal Casing.
PARTS LIST CONTINUED
PART NUMBER
DESCRIPTION
FES001-001 Replacement Seal Set
Sealing Range .050” - .080”
Includes Buna-N O-Ring Seal and
Seal Casing.
FES001-002 Replacement Seal Set
Sealing Range .030” - .050”
Includes Buna-N O-Ring Seal and
Seal Casing.
FEB001-0050 Buna-N Replacement O-Ring Seals
Sealing Range .030” - .050”
Five seal changes per package.
FEB001-001 Buna-N Replacement O-Ring Seals
Sealing Range .050” - .080”
Five seal changes per package.
FEB001-002 Buna-N Replacement O-Ring Seals
Sealing Range .080” - .130”
Five seal changes per package.
30539-000 Internal Spring for FE001 Connector
Pilot Port
Test Port
Test Piece
Entrance Hole