GLD Products RENO II 7.5’ Pool Table Item 64-0126 RENO II POOL TABLE Assembly videos available at gldproducts.com 7.5’ Foot Table Vídeos para armar disponible en gldproducts.com Replacement Parts Order direct at www.gldproducts.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 Staple your receipt here.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 Congratulations and THANK YOU for purchasing the RENO II 7.5’ Pool Table. You have chosen a product that should provide years of entertainment. To assist you with customer service and warranty claims, staple your receipt to the inside cover, then keep this manual in a safe place for future reference. GLD Products S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 Fax: 1-800-841-6944 Email: gld@gldmfg.com Web: www.gldproducts.
GLD Products RENO II 7.5’ Pool Table Parts Identifier Part No./ Qty Illustration/ Order Number Item 64-0126 Part No./ Qty Illustration/ Order Number Part No./ Qty 1 2 3 Qty. 1 Qty. 16 Qty. 2 Table Top Assembly Order No. 1-18 4 Qty. 2 5 Side Cabinet Apron Order No. 1-21 7 Qty. 32 1/4 x 1-1/8 Socket Head Allen Screw Order No. 1-24 Support Beam Order No. 1-5 5/16-18 Barrel Nut Order No. 1-8 1-3/4" Phillips Head Screw Order No. 1-253 Qty. 4 Qty. 32 5/16-18 x 2" Hex Head Bolta Order No.
GLD Products RENO II 7.5’ Pool Table Parts Identifier 25 Qty. 2 57" Billiard Cue Order No. 2-23 28 Qty. 1 26 27 Qty. 2 Qty. 1 Chalk Order No. 2-24 29 Billiard Balls Order No. 2-21 31 Qty. 2 Item 64-0126 Qty. 1 Triangle Order No. 2-27 30 Brush Order No. 2-22 Qty. 2 Preassembled Rail/Apron Foot Right or Head Left Order No. 1-207 32 Preassembled Rail/Apron Foot Left or Head Right Order No. 1-208 Qty. 2 Preassembled Rail/Apron End Rail Order No. 1-206 a.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST: Please refer to page 17. GLD Products Available 8 am to 4:30 pm Central Standard Time S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 Fax: 1-800-841-6944 Email: gld@gldmfg.com Web: www.gldproducts.com For all claims, please have your receipt and item number when you call. The product item number can be found on the front cover.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 Assembly Tips Make sure you understand the following before you begin to assemble your game table. 1. READ THIS MANUAL all the way through before beginning assembly. 2. When installing parts that have more than one bolt, start ALL bolts in that part by hand before tightening anything. 3. Some drawings or images in this manual may not look exactly like your product. 4. You will need a second adult to assist with this assembly.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 1 - ASSEMBLE THE APRONS 1. Place the four apron side pieces (#3 and #4) in position. They should be upside down. 2. Use an angle bracket (#11) in each corner. Finger start four bolts (#14) with washers (#19) through the angle bracket and into two of the apron pieces. 3. Repeat in all four corners. 4. Tighten all the bolts (wrench #23). When tightening the bolts, be certain the two pieces are properly lined up at the corners.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 3 - ASSEMBLE THE LEGS All of the leg sides are the same and can be assembled interchangably. 1. Select two leg sides (#2) and position them as shown. 2. Start two screws (#7) with washers (#9) then tighten with Allen wrench (#24). Repeat with remaining sides to form 4 legs. 3. Prepare the leg tops (#5) by starting the 4 screws (#8) from the finished side of the top piece.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 4 - ATTACH THE LEGS 1. Each leg is held in place by four bolts (#15) with washers (#19). 2. Position the leg on top of the bracket. Insert a bolt with washer through the bracket and into the leg. 3. Finger start all four bolts, then hold the leg in its final position. 4. Tighten the bolts using the wrench (#23). Repeat for the other 3 legs. 5. Screw the leveler (#21) half-way into the bottom of each leg.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 6 - INSTALL SUPPORT BEAMS 1. The table base is now right-side up. To install the two support beams (#10), position the support beams on the base assembly in the appropriate slots. 2. Insert a bolt (#17) with a washer (#18) through the side support. 3. Insert a barrel nut (#13) into the hole at the end of the beam, making sure the slot is visible and the slot lines up with the bolt. Thread the bolt into the barrel nut.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 7 - LEVEL THE TABLE BASE Do not drag the table to a new position. Lift and carry it. Do not lift using the pockets. 1. Put the base where you will be using the table. 2. Use a carpenters level to find the low side. 3. Lift the table leg off the floor and unscrew the leveler in the bottom of the leg a small amount. 4. Repeat until the base is level. Be sure to check level at both ends side to side as well as the longer length. 12 1-800-225-7593 www.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 8 - ATTACH THE TABLE TOP 1. Inspect the underside surface of the table top (#1). When the table is shipped there are several wooden shipping blocks screwed to the bottom. These must be removed. The area of the table top that rests on the side supports must be free of raised material around screw holes. NOTE: Be certain the two support beams (#10) are screwed down, not over-tightened and will not push up on the table top. 2.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 STEP 9 - SECURING AND LEVELING THE TABLE TOP When the table top is in position, and not screwed down, it is flat. 1. Be certain the table base is in it’s final position and level. 2. The table top must be in it’s final position. 3. Finger tighten all the bolts. CAUTION: If using a power tool to tighten the bolts, be certain it is on a low torque setting. 4. Using the proper wrench, lightly tighten each bolt without crushing the underside supports. 5.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 THE TABLE IS ASSEMBLED. IF IT IS NOT ALREADY IN POSITION FOR PLAY, IT CAN BE MOVED. DO NOT SLIDE OR DRAG. Use at least two adults to lift into position, then re-level. Care and Use of your Table • • • • • • • • This product is intended for INDOOR use only. DO NOT sit, climb, or lean on the table. DO NOT drag the table when moving it. This will damage the legs. Keep your table covered.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 Problem: Pool balls roll to edges. Cause: The playing surface is high in the center. Solution: Loosen the bolts that hold the table top to the supports. Add shims (.010 inch thick) along the two side supports. Tighten the bolts on the two short ends first. Then lightly tighten the bolts along the edges. Roll pool balls to test. 16 1-800-225-7593 www.gldproducts.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 90-DAY LIMITED WARRANTY The Manufacturer warrants to the original retail purchaser that this product is free from defects in material and workmanship under normal use and conditions for a period of ninety (90) days from the date of original purchase.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 This page intentionally left blank. 18 1-800-225-7593 www.gldproducts.
REGISTER YOUR PRODUCT Place postage here Complete this form, include a copy of your receipt, fold, tape (do not staple) and return within 10 days of purchase. This protects your warranty and will help us develop new products! Cut here. GLD Products Warranty Department S84 W19093 Enterprise Drive Muskego, WI 53150 USA Fold here second. www.gldproducts.
This page intentionally left blank.
Mail To: GLD Products S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 · FAX 800-841-6944 Email: gld@gldmfg.com Web Site: www.gldproducts.com RENO II 7.5’ Pool Table Item 64-0126 Parts Re-Order Form Name Address City State Zip Order No.
GLD Products RENO II 7.5’ Pool Table Item 64-0126 Method of Payment _________Check or Money Order _________ Credit Card _____ Visa _____ MasterCard _____ Discover _____ American Express Card #________________________________________________________ Security Code #__________________Billing Address Zip code____________ Signature______________________________________Exp.
www.gldproducts.
PROUD MANUFACTURER OF S84 W19093 Enterprise Drive • Muskego, WI 53150 USA 262.679.8730 or 1.800.225.7593 tele 262.679.8738 or 1.800.841.6944 fax Email: gld@gldmfg.com www.gldproducts.