Instructions / Assembly

GLD Products RENO II 7.5’ Pool Table
Item 64-0126
6 1-800-225-7593
www.gldproducts.com
IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST:
Please refer to page 17.
GLD Products
Available 8 am to 4:30 pm Central Standard Time
S84 W19093 Enterprise Drive
Muskego, WI 53150 USA
1-800-225-7593
Fax: [phone]
Email: [e-mail]
Web: www.gldproducts.com
For all claims, please have your receipt and item number when you call. The
product item number can be found on the front cover.
If you are instructed to return the product for service, you are
responsible for shipping the unit at your expense.
PRODUCT REGISTRATION
Important: The product registration form on page 19 and a copy of your
receipt must be completed and returned within 10 days of purchase to
validate your warranty.
Online registration is also available. Go to http://gldproducts.com/warranty-
information or click on this link. Follow the online instructions.
Preparing for Assembly
• Be sure to unpack all of the parts included in this package. Some
parts may be in obscure locations of the packaging. Check inside
any tubes or sleeves. Save all packing material until the product is
fully assembled and functional.
• Compare the parts in your package with the Parts Identifier
description on page 5.
• After unpacking large products, some disassembly may be required
prior to beginning the assembly.
Tools Required
• Wrench (#23) - included with table
• 5/32" Allen wrench (#24) - included with table
• Phillips screwdriver (not included)
• Flat head screwdriver (not included)
• Level (not included)
• Electric screwdriver may be helpful. CAUTION: You must set at
LOW TORQUE and use extreme caution because you could
overtighten the hardware, strip the screws, or damage the table.
• 12 mm Hex socket or wrench (not included)