GLD Products Pockey 3 in 1 Table Item 64-1046 POCKEY 3 IN 1 GAME TABLE Replacement Parts Order direct at www.gldproducts.
GLD Products Pockey 3 in 1 Table Item 64-1046 Staple your receipt here. Important: A copy of your receipt will be needed to activate your warranty (see page 16).
GLD Products Pockey 3 in 1 Table Item 64-1046 Congratulations and THANK YOU for purchasing the Pockey 3 in 1 Game Table. You have chosen a product that should provide years of entertainment. To assist you with customer service and warranty claims, staple your receipt to the inside cover, then keep this manual in a safe place for future reference. GLD Products S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 Fax: 1-800-841-6944 Email: gld@gldmfg.com Web: www.gldproducts.
GLD Products Pockey 3 in 1 Table Parts Identifier Item 64-1046 Parts Identifier Part No./ Qty Illustration/ Order Number 1 Part No./ Qty 2 Qty. 1 4 Goalie Order No. 2-18 Hex Head Bolt 1/4" x 3" Order No. 2-14 16 Qty. 4 Hockey Puck Order No. 2-20 Qty. 10 Qty. 6 Qty. 1 Set Cue Stick Order No. 2-23 Qty. 2 Hex Head Bolt 1/4" x 2" Order No. 2-13 Qty. 1 Felt Pad Order No. 2-19 Qty. 18 1/4" Washer Order No. 2-15 15 3/4" Washer 3 are pre-assembled Order No. 2-16 Qty.
GLD Products Pockey 3 in 1 Table Parts Identifier 25 26 2 Cues Rack Order No. 2-204 28 Qty. 2 Table Tennis Top (End) Order No. 2-286 Accessory Holder Order No. 2-205 Qty. 8 Slide Scorer Order No. 2-208 Qty. 4 3/16" x 1" Allen Key Bolt Order No. 2-203 Qty. 2 F4 x 1" Phillips Countersunk Screw Order No. 2-134 Table Tennis Ball Order No. 8-4 Table Tennis Top (Middle) Order No. 2-287 Parts Identif 1-800-225-7593 www.gldproducts.com Qty. 1 Allen Wrench Order No. 2-116 Qty.
GLD Products Pockey 3 in 1 Table Item 64-1046 IF YOU HAVE A WARRANTY CLAIM, CALL US FIRST Please see page 16. GLD Products Available 8 am to 4:30 pm Central Standard Time S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 Fax: 1-800-841-6944 Email: gld@gldmfg.com Web: www.gldproducts.com For all claims, please have your receipt and item number when you call. The product item number can be found on the front cover.
GLD Products Pockey 3 in 1 Table Item 64-1046 Tools Required • • • • • • • Allen Wrench (#30) Open End Wrench (#21) Box Wrench (#24) Phillips Screwdriver (not included) Flat Blade Screwdriver (not included) Level (not included) Electric screwdriver may be helpful. CAUTION: You must set at LOW TORQUE and use extreme caution because you could overtighten the hardware, strip the screws, or damage the table. Assembly Tips Make sure you understand the following before you begin to assemble your game table.
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 1 - ASSEMBLE THE PEDESTAL Remove all components from the carton. NOTE: Parts are packed inside the table top (#1). Remove the pool table surface from the table top (#1) by removing all the screws (#33) that hold it in place. Inside the table top you will find all the parts needed to assemble your table. when all the parts are out of the table top, replace the pool table surface. Reattach the pool table surface by replacing the screws (#33).
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 2 - ATTACH THE TABLE LOCKS IMPORTANT: The T-nuts are pressed in at the factory. They are on the side of the pedestal that faces the table top (the inside). 1. Attach two table locks (#5) to the outside of each pedestal using bolt (#29). #5 #29 Table top goes on this side Table top on this side T-nuts STEP 3 - ASSEMBLE THE BASE 1.
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 4 - SECURE THE BASE TO THE PEDESTALS 1. Insert barrel nuts (#8) into the seven holes in the base. 2. Start the four 3" hex head bolts (#10) with 1/4" washers (#12) through the ends of the pedestal and into the side rails. Finger tighten. 3. Start the three 2" hex head bolts (#11) with 1/4" washers (#12) through the center of the pedestal and into the end rails. Finger tighten. 4. Tighten all bolts using the box wrench (#24).
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 5 - ATTACH THE TABLE TOP NOTE: The end of the table top with the power cord has the three 3/4" washers (#14) and two 3/4" hex nuts (#15) pre-assembled on the power cord. It is possible that the support axle bolts are not pushed out completely. To pull them out, thread a nut onto the end and pull outward with pliers. If the bolt does not pull out freely, tap it with a hammer to break it loose, then pull. 1. Open all four of the table locks.
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 6 - ATTACH PUCK CATCHERS AND ACCESSORY HOLDER 1. Align the puck catcher (#6) with the pre-drilled holes on each end of the playing table. Secure it to the pedestal with round head screws (#13). Run the power cord through the puck catcher. 2. Align the accessory holder (#26) with the pre-drilled holes on each end of the playing table. Secure it to the pedestal with screws (#13). 3.
GLD Products Pockey 3 in 1 Table Item 64-1046 STEP 7 - ADJUST LEVELERS 1. With the help of another person, turn each leg leveler until the table rests level to floor. 2. Check with a carpenters level placed cross-wise and length-wise on the table top. 3. Readjust levelers if necessary. STEP 8 - ASSEMBLE GOALIES Remove backing from felt pads (#9) and place on bottom of goalies (#7). #9 #9 #7 The assembly is complete. To Rotate the Table: CAUTION: This should be performed by an adult.
GLD Products Pockey 3 in 1 Table Item 64-1046 To Level the Table: • • Place a carpenters level on the table. Screw the leg levelers in or out until table is level. Troubleshooting: • • If the pool table side is not level, first try to level it by using the leg levelers on each leg. Most of the time the table can be easily leveled using this method. If the table surface still needs adjustments, shims may be used on the cross supports to bring up the low spots.
GLD Products Pockey 3 in 1 Table Item 64-1046 Care and Use of your Table • • • • • • This product is intended for INDOOR use only. DO NOT sit, climb, or lean on the table. DO NOT drag the table when moving it. This will damage the legs. Keep your table covered. To clean the hard surfaces spray a cloth with a mild cleaner and wipe. Pucks that fly off the table may have chipped edges. Inspect the puck and replace if needed. 15 1-800-225-7593 www.gldproducts.
GLD Products Pockey 3 in 1 Table Item 64-1046 90-DAY LIMITED WARRANTY The Manufacturer warrants to the original retail purchaser that this product is free from defects in material and workmanship under normal use and conditions for a period of ninety (90) days from the date of original purchase. The Manufacturer’s liability is limited to the repair or replacement, at its option, of any defective product and shall not include any liability for indirect, incidental or consequential damages of any kind.
REGISTER YOUR PRODUCT Place postage here Complete this form, include a copy of your receipt, fold, tape (do not staple) and return within 10 days of purchase. This protects your warranty and will help us develop new products! Cut here. GLD Products Warranty Department S84 W19093 Enterprise Drive Muskego, WI 53150 USA Fold here second. www.gldproducts.
This page left intentionally blank.
Mail To: GLD Products S84 W19093 Enterprise Drive Muskego, WI 53150 USA 1-800-225-7593 · FAX 800-841-6944 Email: gld@gldmfg.com Web Site: www.gldproducts.com Pockey 3 in 1 Table Item 64-1046 Parts Re-Order Form Name Address City State Zip Order No.
GLD Products Pockey 3 in 1 Table Item 64-1046 Method of Payment _________Check or Money Order _________ Credit Card _____ Visa _____ MasterCard _____ Discover _____ American Express Card #________________________________________________________ Security Code #__________________Billing Address Zip code____________ Signature______________________________________Exp.
www.gldproducts.
PROUD MANUFACTURER OF S84 W19093 Enterprise Drive • Muskego, WI 53150 USA 262.679.8730 or 1.800.225.7593 tele 262.679.8738 or 1.800.841.6944 fax Email: gld@gldmfg.com www.gldproducts.
