Instructions / Assembly

GLD Products Pockey 3 in 1 Table
Item 64-1046
14 1-800-225-7593
www.gldproducts.com
To Level the Table:
• Place a carpenters level on the table.
• Screw the leg levelers in or out until table is level.
Troubleshooting:
• If the pool table side is not level, first try to level it by using the leg
levelers on each leg. Most of the time the table can be easily leveled
using this method.
• If the table surface still needs adjustments, shims may be used on
the cross supports to bring up the low spots. See example below:
If the fan does not go on:
• Unplug the fan from electrical outlet.
• Inspect wiring for proper connection.
• Plug in to test.
If the fan works but the table has dead spots:
• Use a small drill bit and clear the holes by hand. DO NOT use
electric drill. Manually push the drill bit into the holes to clear.
Clean the surface by spraying a rag (do not spray directly onto the table top) with a furniture
polish (like Pledge) and buffing the surface of the table and the puck. This will provide a bit
more “float” which may help prevent getting hung up in the “dead” areas.
#1