Datasheet

www.fatshark.com
Fat Shark Specification Document
Model Number: 2201
Model Name: DIY TX Camera Cable
Document Revision/Date: Rev A/ 08.14.2014
Product Description:
This DIY TX to Camera Cable includes a 5-pin Molex connector on one side and pre-tinned open
ends on the other side, so you can DIY custom camera harnesses for your uncased Fat Shark
and ImmersionRC Transmitters.
Specifications:
Electrical:
 Wire Function
Green: Audio Right
White: Audio Left
Yellow: Video
Black: Ground
Red: +5V out
 Terminal: Molex 2.54 Female Tin
 Housing: Molex 2.54 5-pin Male with Black Holder
Mechanical:
 Length : 20 cm
 Weight: 5.2 g
Packaging:
 Packing Method: PE Plastic Bag
Operational Advice:
Please refer to the following diagram for proper cable connecting, incorrect wiring may cause
burnout. Shoving 12V up the 5V line will destroy transmitter. When connecting 12V cameras,
take precaution to remove the Red cable – don’t even think of connecting it.
Green: Audio Right
White: Audio Left
Yellow: Video
Black: Ground
Red: +5V Out (Optional Camera Power)