Instructions / Assembly

Step 1: GET READY

Pick a spot. Fathead wall decals adhere well to smooth, indoor surfaces. Recommended and NOT

recommended surfaces are listed below. You want to choose a RECOMMENDED surface.

Recommended Surfaces:

 Smooth Walls

 Painted Drywall

 Glass

 Metal

 Sanded Wood (without lacquer)

 Inside, temperature controlled environments

NOT Recommended Surfaces:

 Freshly painted walls. Wait 30 days after painting before you put up your Fathead decal.

 Textured Walls

 Unpainted drywall

 Brick

 Cinder Block

 Porous, textured paneling

 Outside, non-temperature controlled environments

Measure. You don't want to start only to find out you don't have enough room. The dimensions are printed on

the same sheet as your Fathead decal.

Unwind and relax. If you'd been rolled up and stuck in a box you'd need to relax for a bit too. Lay flat for an

hour prior to application.

Step 2: GET CLEAN

PAGE 1
Step 1: GET READY Pick a spot. Fathead wall decals adhere well to smooth, indoor surfaces. Recommended and NOT recommended surfaces are listed below. You want to choose a RECOMMENDED surface. Recommended Surfaces:  Smooth Walls  Painted Drywall  Glass  Metal  Sanded Wood (without lacquer)  Inside, temperature controlled environments NOT Recommended Surfaces:  Freshly painted walls. Wait 30 days after painting before you put up your Fathead decal.
PAGE 2
You like clean sheets, Fathead decals like clean walls. Use a warm damp cloth to wipe down the surface and let it dry completely. DO NOT use soap or cleaning agents. They can make your decal stick poorly, which means it could fall down, and that's just ugly. Step 3: GET HELP No need to call 911, just get a friend. This is important if you're putting up one of our REAL.BIG. Fathead wall decals. Here's why: you'll start peeling the decal off the sheet when you realize it's as big as you… and it's sticky.