Installation Guide

You like clean sheets, Fathead decals like clean walls. Use a warm damp cloth to wipe down the surface and
let it dry completely. DO NOT use soap or cleaning agents. They can make your decal stick poorly, which
means it could fall down, and that's just ugly.
Step 3: GET HELP
No need to call 911, just get a friend. This is important if you're putting up one of our REAL.BIG. Fathead
wall decals. Here's why: you'll start peeling the decal off the sheet when you realize it's as big as you… and it's
sticky. When it sticks to itself, you'll say something nasty, and then you'll wish you had called that friend.
If you're putting up Fathead Jr decals or other smaller Fathead products, then going solo is OK.
Step 4: GET IT ON
With help from that friend you called, start at the top of your Fathead decal and carefully peel it from its
backing.
Place one corner on the wall and slowly smooth the rest into place using minimal pressure. If you make a
mistake, gently peel the decal off the wall and reposition it. Take your time and you'll do just fine.
REAL.BIG. Fathead wall decals come with a yellow plastic squeegee to help you get out any wrinkles or air
bubbles. USE IT! Start from the middle of your decal and push out to the edges.
Keep the backing in case you want to move your decal to a new location.
Step 5: GET TOGETHER
Put your Fathead wall decal up in time for the big game, surprise your child with their renovated room or
complete your fan cave.