Instructions / Assembly

30
4. DELETE ALL THE EXISTING USER CODES AT ONCE
Procedures
(1) Rotate the internal thumbturn to horizontal position press # (the red indicator is on, you
are in setup mode)
(2) Input programming code press# press 40 press# press and hold C (for 3 seconds)
until a beep is heard.
5.DISABLE ALL THE EXISTING USER CODES (VACATION MODE)
Procedures
(1) Rotate the internal thumbturn to horizontal position press # (the red indicator is on, you
are in setup mode)
(2) Input programming code press# press 50 press#.
(Please repeat the above procedures to enable all the user codes)
(This will delete all the user codes EXCEPT the programming code)
NOTE: If you will be away from home for vacation, please use vacation mode to prevent anyone
accessing your lock and this will just make the codes Temporarily "INACTIVE", not DELETE
them from the unit.
4. DELETE ALL THE EXISTING USER CODES AT ONCE
5.DISABLE ALL THE EXISTING USER CODES (VACATION MODE)
SETUP MODE